9 Approaches For Solving “Tuya Smart Not Working With Google Home”

The Tuya module does support Google Home, but it can be a bit complicated for users to set up their smart devices with this integration.

You will likely run into complications with Tuya Smart not working with Google Home if you’re not that experienced with this integration.

Figuring out the optical configurations on your own is not always the easiest or simplest job. You will likely go through a few snags and issues down the road as you try to adjust the system.

So, be sure to keep all that in mind and keep trying the Tuya smart system when it is not working with Google Home.

So, it is always a good idea to seek help from an expert and have him set up the smart devices for your home.

Tuya Smart Not Working With Google Home

On the other hand, if you want to save on some fees, then going through the basic troubleshooting methods mentioned here will help you fix the Tuya module.

Most of the time, you will just have to adjust the third-party commands and optimize the configuration to authorize access.

It will barely take you a few minutes if the hardware side of things is managed properly. So, try out these steps, and Tuya smart will start working with Google Home.

1. Check Voice Commands 

Most of the time, you will be able to fix the issue with the Tuya smart not working with Google Home by updating the voice controls.

It would be better if you could update the voice commands to simple words and then try accessing the smart devices again. 

This should be enough to get the smart device working again.

So, if you’ve been using complex device names and the names of one or more devices are similar, just update the controls for the malfunctioning unit.

This will fix the situation with Tuya Smart Not working with Google Home.

2. Go Over Third-Party Controls

The third-party controls for your smart app are the next thing that you need to consider when Tuya Smart is not working with Google Home.

While the Google Home unit works with an extensive range of smart devices, there is always a chance that your off-brand units are not compatible with this app.

For this reason, you need to check the third-party controls through the Tuya APP and make sure that the device you’re trying to control supports voice commands.

Otherwise, you won’t be able to secure any performance from the unit.

3. Authorize Access Through Service Provider

This issue with the Tuya Smart not working with Google Home is more common for smart cameras, and you need to reach out to your service provider to authorize access.

Otherwise, you won’t be able to access the smart camera even when the unit is paired properly with Tuya APP.

So, if you’re sure that there are no configuration-related issues with the integration, just reach out to your service provider and authorize access to Google Assistant.

4. Power Cycle Your Smart Device 

Issues with the device itself can also lead to situations where Google Home won’t be able to secure any response from the unit.

Minor programming bugs like these are pretty common, and the only thing you can do is to power cycle the smart device.

So, remove the power connections from the smart device that is not responding to Google Home commands.

After waiting for a few minutes, you can connect the power cable again, and your unit should start working perfectly with the smart device.

So, make sure to power cycle your smart system to troubleshoot these programming bugs.

5. Re-Configure APP Account

Random power cuts and firmware updates can lead to this situation with the Google Home unit not working with the Tuya Smart system.

So, if you’ve also updated the smart device or experienced a sudden power cut, then you should try reconfiguring the Tuya module from the start.

It will take a lot of your time if you have multiple units configured with the integration, but that is the only way to get ahead of the programming bugs.

So, make sure to reconfigure the Tuya module and pair your device with Google Home again.

6. Check Power Status & Network

Next, make sure to check the power status and the network strength on your smart devices.

Issues with the network and improper voltage can also lead to similar situations with the Tuya module not working with Google Home.

So, try to decrease the distance between the route and your smart devices and make use of a multimeter to isolate issues with the Google Home voice controls.

Hopefully, you won’t have to deal with the same situation again once the network strength is improved and proper power is supplied to the smart devices.

7. Try Resetting The System

At this point, you just need to proceed with the reset. The issue might just be with the smart device and not the configurations.

The programming side of things can be hard to manage in a few cases, and you will be best served with a quick reset.

One downside here is that you will have to go through all of the configurations from scratch.

It is not time efficient, but that doesn’t mean that it didn’t help countless customers get the ideal response out of the Tuya smart system.

So, all that you need to do here is to follow through with a quick reset for your respective devices.

Hopefully, you will not have to deal with more complications down the road, and the system will be fixed fairly quickly when it comes to the Tuya smart system.

However, if you’re not that sold on the idea of a reset, you can try your luck one more time on a simple power cycle routine. 

8. Check For Hardware Issues

Next, you need to check the devices that you’re trying to control. There is always a possibility that the connected devices are damaged, which is why you’re not getting any response from the smart commands.

So, you need to go about fixing this situation accordingly. All that you have to do is to check the connected devices for discolored sections or cracks.

This will indicate water damage or impact damage, depending upon the severity of the situation. So, be sure to go about checking the unit and then fix the issues by claiming the warranty.

There are no quick methods that can help you here, and you need to reach out to the official support team for more pointers.

If the issue with the unit is genuine and you will be able to grab a replacement. So, be sure to keep that in mind and get a replacement by claiming the warranty.

9. Ask the Official Support Team

Even if you’re not that sure about the hardware side of things, reaching out to the official support team is not a bad idea.

These experts will help you figure out the situation with the configurations when you’re not able to address the error yourself. 

There is no point in trying to go through all of these pointers when you can’t seem to put your finger on the issue.

So, all that you have to do is to explain your end to the dealer, and he will help you through the intricate details of the troubleshooting process.

If everything goes well, it will take less than 10 minutes to get help from the dealer.

Hopefully, you will not have to wait long to get help from the official support team, and addressing these errors will be fairly simple. 

Lastly, if you both come to the conclusion that the hardware is damaged, you will have to claim the warranty.

That way, you will be able to get a new piece from the dealer, and you will be able to install it accordingly.

Wrapping Up

These points should help you get your performance back from Tuya smart when it is not working with Google Home.

Most of the time, the situation is not that serious, and you have to focus more on adjusting the configurations to get a decent response from the Tuya system.

If you’re lucky, a quick adjustment of the voice commands will be enough to help you in most situations.

So, be sure to test out the voice commands before anything else and then give the device a quick power cycle.

That should help you get the performance back, and you can go about optimizing the unit.

From there, you can also check on the hardware side of things to make sure that the hardware is not damaged.

If the issue is with the hardware, then the situation can become a bit sticky. You will have to claim the warranty or get it repaired to get ahead of the situation. 

So, don’t try to fix the situation on your own when you’re not that sure about the hardware side of things.

You will just be holding yourself back as you struggle to secure a response out of the smart unit.

Hopefully, you will not have to deal with much hassle while securing support from an expert.