8 Ways To Fix Kichler Ceiling Fan Remote Not Working

Ceiling fans are one of the most important appliances in the house. They help the user in cooling a particular room in which they are usually installed.

They come in plenty of different forms and have been significantly improved over the course of time due to smart technology.

Many brands like Kichler have joined the market with their amazing lineups, and you will not be disappointed by the performance that is brought forward by these units.

All you have to do is to spare a bit of cash, and you’ll enjoy all the benefits associated with these robust setups.

How to Fix Kichler Ceiling Fan Remote Not Working?

Today, even ceiling fans come with remotes that allow the user to be able to remotely control a fan however he’d like. However, certain users have been complaining about their Kichler ceiling fans not working.

As a result, they don’t have much idea of what to do. Through this article, we will be taking a look at some of the ways how you can fix this issue for good. All of the troubleshooting steps are mentioned right down below:

1. Check the Remote for Any Possible Issues

If you find your remote not working or responding, then the very first thing to check is the remote itself.

It could be that your remote is not working due to the remote not getting any power. Anyhow, you will have to check whether the remote is even turning on or responding.

The issue could be as simple as the remote’s battery running out of juice. If that is so, then you will have to buy a new pair of batteries for the remote.

2. The Issue Could Be with Your Fan!

It could also be that the reason why your remote is not working is due to the fan not receiving any signals from the remote.

Hence, you will also have to check your fan for any possible issues. We recommend checking things like the capacitor of the fan.

Also, check whether the fan is working fine if not used with the remote. If it is indeed working fine, then the issue should most likely be with the remote.

3. Faulty Remote

You could have a faulty remote which is not working due to a more technical issue. We have also seen a few cases where users have received a faulty remote from the get-go.

This leads us to believe that you could be facing the very same issue.

In either case, you will have to either get the remote checked or try another remote to see if that does anything. In simple words, you may have to get the remote replaced with a newer working unit.

4. Check Range

At this point, you should also check on the issues with the range. Just like any other smart remote, you need to be mindful of the effective range when trying to secure a decent response.

You can’t simply use the transmitter in any orientation, and fixing the alignment will do you well. 

So, if you think that there are no issues with the remote hardware, just limit the range between your devices.

Make sure that the range between the transmitter and the receiver is less than 15 feet, and that will be it as you’re trying to access the unit.

However, if you do find the range to be more than optimal, then the issue is more related to the programming side of things.

Either there is something wrong with the DIP switches, or you’re dealing with basic bugs in the system.

So, be sure to check up on that as well, as mentioned here. 

5. Cycle Power Through The Remote

Cycling power through the remote is not the best fix, but it has proven to be effective for countless owners. So, there is no harm in trying it out for your remote as well.

All that you need to do here is to remove all the power from the remote.

This doesn’t mean that you turn the fan off or use the on and off buttons. Instead, you need to make sure that there is no power in the remote by removing the battery.

From there, you can keep the battery removed for a few more minutes until you put it back inside.

Nine times out of ten, the issue will be fixed right here. However, if you’re not too sure about the situation and the problem doesn’t get fixed, then you will have to take a peek at the DIP switches.

6. Change DIP Switch Code

Sometimes, as you’re changing the batteries on the remote or checking up on the wiring connections to the receiver, it can create problems with the DIP switch codes.

You will have to add or remove the DIP clips to get a better hang of the situation.

The remote will not work until the code on the remote matches the receiver, and you will keep struggling with the connection.

So, be sure to check up on the installation and then go through the orientation of the DIP switches to redefine the code.

If you’re not that sure about how to define the code for the dip switches, then asking an expert will help you speed through the process.

There is no point in struggling with the system when you’re not even sure about the setup.

So, all that you need to do here is to engage the local contractors or the dealer, and they will guide you on the setup. Alternatively, there are compatible details mentioned in the manual if you can’t seem to find the fix.

7. Check On The Receiver

If the issue is not fixed, we suspect that the issue is with the receiver. The situation with the receiver getting damaged during installation is just too common. This is especially true if you installed the fan yourself. So, if you’re in the same boat, just check up on the receiver.

If you do find it to be damaged and there are visible cracks in the system, then your hands are pretty much tied. You will have to leave this job to the professionals.

There are no other methods around it, and seeking help from an official might just be the only fix here.

The upside here is that the warranty deal on these units is great. If you believe that the fan got damaged during delivery, then you’re not liable for any of these issues.

Instead, you will need to reach out to the dealer and have him take charge of the situation.

He will inquire a bit about the setup and then verify your purchase on this end. It can take a while for the verification to complete, and you can provide him with a receipt to speed through the process. 

From there, you will have the new fan within the same week. Hopefully, you will not have to deal with any errors when using this new fan, and it will remain a permanent part of your setup.

8. Ask Official Support

Last, even if you’re not sitting on a valid warranty, there is no shame in reaching out to the dealer.

These professionals will make the troubleshooting job much easier, and you will not have to bother with any issues on your end.

All that you need to do here is to explain your issue through a support ticket or call them directly.

Either way, you need help from an expert that will help you avoid hours of troubleshooting routines with the system. So, if you’re just stuck in the problem and can’t seem to find a fix, call official support.

They might even help you secure a replacement if the issue is genuine. So, don’t hesitate to get a response from these professionals.

The Bottom Line

This article has all the details that you need in order to learn about the Kichler ceiling fan remote not working.

Ensure that you follow all the instructions that we have mentioned in the article. Doing so should help you in getting the issue resolved without any further complications.

Almost all of the airports that mentioned issues with the fan pointed out that the error was more related to the batteries and not the hardware.

If your fan remote was also working perfectly up to this point, then there is a good chance that you’re in the same boat. All that you need are new batteries.

From there, fixing the unit will come easy to you as long as there are no hardware issues. On the other hand, if you’re out of luck and do find some cracks and frayed sections on the remote, then it is likely damaged.

You can’t rely on any quick methods to get through the fix here.

Instead, you will have to call the dealer and demand a replacement. He will take a while to verify your purchase and then point you in the right direction.

It all comes down to how you’re planning on addressing the situation. So, be sure to ask the dealer when the issue is out of your hands.