Smart plugs can help make your life easier, even your regular devices can be converted into smart devices using these plugs. Smart plugs are inexpensive and quite easy to set up.
You don’t have to worry about fixing wires to get your smart plugs to work. All you have to do is plug the device into a power outlet and then configure it using the mobile app.
Sounds simple enough, right? Well, No. There are a few snags that you can hit along the way as you’re trying to adapt to this system.
You can’t expect this device to perform if there are hardware issues or network complications in the system. So, be sure to keep that in mind and test out some of the other options as you try to set up the Gosund smart plug.Â
Even though Gosund smart plugs are very reliable, some customers have complained about red LED indicators showing up on their smart plugs. Here are a few methods you can follow to fix this issue.
How To Fix Gosund Smart Plug Red Light?
- Power Cycle Your Router
This error occurs when your smart plug is no longer able to connect to your Home Network.
This is the reason why your smart device becomes unresponsive, and you’re unable to use it from the mobile app. As no commands will reach the smart plug.
For most users, simply power cycling their router sorted out the issue. So, just take out the power cord from your router and wait for around 30 seconds, after which plug the router back in and try to connect your smart plugs to the Wi-Fi network.
- Check Channel Bandwidth
Most often than not, customers are not aware that their smart devices are not able to connect to the 5.0GHz band. This is why you’re running into the red-light error. Simply open up your router’s control panel using the web interface.
After that, browse to channel settings and switch the channel bandwidth back to 2.4GHz. Click apply and close the settings. Once that is done, restart your router again and try connecting your smart plug to the router.
- Check For Interferences
At this stage, you need to move on to check for interferences and other errors that can stem from the presence of extra wireless units in your room. While that might sound like a basic thing to do, it can take a while to adjust your smart system.
It all comes down to how you’re planning on addressing the situation.
There is simply no gain in adding countless accessories as well as smart units in the same room. That will only clutter up the wireless setup in your room as you struggle to get any performance.Â
So, to fix this situation, you will have to remove all of the extra wireless units from the room and then test out the connection again.
There are no quick fixes that can help you here, and you need to remove all of the extra units from the same network.
From there, you can try setting up the smart plug one more time. Nine times out of ten, the issue will be fixed right here. If it does, you will know for sure that the interferences are to blame here.
You can go about adding router extensions and removing all the extra units to get a better response. That will mostly be it when you can’t seem to get any performance out of the Gosund smart plug, and it keeps presenting you with a red light.Â
- Try Limiting The DistanceÂ
The distance between the smart unit as well as the router will also lead to the same situation. In ideal cases, the distance should be less than 20 ft. However, that can vary depending on the type and the model of router you’ve installed.
If you’re not using a phenomenal system from ASUS to help you with the network, then your best bet is to keep the distance short. That will have a direct impact on the signal strength, and you might just get rid of the red light issue.
Furthermore, you need to keep the unit away from metal objects and thick walls to improve the range.
That will mostly be enough, and you will not have to deal with more errors down the road. It all comes down to improving the signals from the router.Â
Once the connectivity errors are addressed, you will be able to get rid of the red light issues.
There might be other factors at play here, but you should only focus on improving the signals and resetting the system to eliminate programming bugs.
From there, it is not that difficult to get a consistent response from the smart plug if the hardware itself is in good shape.
It all comes down to how you’re planning on addressing the situation. Hopefully, these details will improve your perspective on the issue.
- There Might Be Issues With The Power Output
Next, you need to check on the temperature as well as the power status from the outlet.
At this stage, you will be somewhat sure that the issue is not related to the connectivity status but rather to the outlet itself. It can be a bit challenging to isolate and fix these errors at times.
All that you need to do here is remove the plug from the outlet for around 20 minutes. From there, you can check the temperature one more time, and the plug should be cool to the touch. Next, you can install the plug in the outlet again.
Wait for a few more moments, and the plug will connect to the router without any issues.
However, if that is not the case, then you will have to check on the voltage output from the source. A voltmeter or a multimeter will help you address this situation.
However, we will recommend that you don’t mess with the system yourself. Instead, you can hire an expert, and he will help you address these errors. You will not have to deal with any safety issues or other errors.Â
So, leave this job to the professionals, as you run the risk of electrocuting yourself.
There is no point in taking that risk, and the expert will do a far better job than you ever can. Sparing a few bucks will help you get a consistent response from all of the appliances as well.
For this reason, you should not worry about the hiring fee and spend some cash here. You won’t regret this decision.
- Reset Your Smart plug
If you have made sure that your connection is working properly, then your best bet is to reset your smart plug to sort out this problem.
To do this, you just have to unplug the smart device from the power outlet and start holding the power button. After a few seconds, plug the device back in while holding the power button.
Once the device is plugged in, release the button, and you’ll notice a LED indicator light up.
This means that your smart device has successfully reset. However, you’ll have to configure it with your mobile app again, which can take quite a bit of time.
- Replacement Order
If you’ve just bought the smart plug, then it is likely that it got damaged during the shipping process. If you hear something broken inside the plug, then it is best to contact your supplier and demand a replacement order.
You shouldn’t have much trouble securing a replacement if your warranty is still eligible.
Otherwise, you can also take your plug to a repair center and have an experienced technician take a look at your smart device.
The technician will be able to pinpoint the issue and fix it for you quite easily. This can save you a lot of time and hassle.
Wrapping Up
Don’t know how to deal with the Gosund Smart plug red light? Try out some of the fixes mentioned here, and you will be all sorted.
It will barely take a few moments to get through these fixes. So, if you’re sure that the hardware is in good space and the plug is not damaged, this guide will be of great help.
On the other hand, if you’re not that lucky and just can’t seem to figure out the issue, then you need to ask someone from the official support team.
There is no point in spending hours of your time trying to fix the system when you can avoid all that by asking an expert for help.
He will not only help you figure out the issue but will also guide you through more fixes.
All you have to do on your end is to follow through with the pointers offered by the experts, and that will be it. There is no gain in complicating the troubleshooting routine for yourself by going at it alone.
Lastly, if the issue is genuine and not related to the programming side of things, then you need to get the plug replaced.
You will get a much better response from the new plug and won’t have to deal with more errors related to the connectivity or the hardware.Â