The biggest reason why so many customers avoid putting their money into cheaper options like B-Hyve is that these devices will repeatedly run into consistency issues.
You won’t be able to get through the week without running into minor issues like the B-Hyve program not running.
When compared with the Rachio systems, you will find these devices to be unreliable and of poor build quality. So, you will lose a lot of value as you try to adjust the system with the irrigation controls in your house.
Moreover, the price point should not be the only concern when you’re going to make a purchase on a device that needs to last for decades.
Choosing the cheaper unit will only lead to more issues down the road, and you will struggle to maintain any consistency.
So, it is a better idea to save up some extra money and go with options like Rachio for your smart home. On the other hand, if you’ve already purchased the B-Hyve system and are experiencing program-related issues, then all hope is not lost.
You can still test out these troubleshooting methods to get your smart device working again. So, follow these steps if the B-Hyve program is not running.
Fixes For The B-Hyve Program Not Running
- Power Cycle B-Hyve System
Even when you’re sure that there are no power-related issues in the system, bugs related to the timer programming can present themselves frequently.
The most effective method of fixing these programming-related bugs is to power cycle the B-Hyve system completely. It won’t take you more than a few minutes, and you just have to remove the batteries from the unit.
Once the batteries have been removed from the system, just add the battery back to the unit after waiting for 2 minutes. This would refresh the configuration, and you won’t have to worry about the same issues again.
- Check Program Configurations
If you’ve just added a new program to the system and it won’t work properly, then you’re likely dealing with configuration-related issues.
It is pretty common for users to miss some steps during the configurations, and you should check the settings one more time to isolate the issue.
Seeking help from customer support will also help narrow down the issue much faster, and you won’t have to waste as much time in the troubleshooting steps.
- Reduce Water Pressure
The water pressure from the B-Hyve system is the next thing you should consider when the programs are not working.
Usually, these issues with the system not engaging even after instructions from the program can be traced back to high pressure in the valves.
So, you need to limit the water pressure and then adjust the timer to get the desired performance from the program.
You should also make sure that the main water line is not damaged. Otherwise, you will have to replace the valves, and it will leave a dent in your budget.
- Remove SchedulesÂ
Sometimes, the schedules and the programs in your B-Hyve unit can overlap and create issues with the execution of the user commands.
If you’re in the same shoes and have set multiple schedules in the B-Hyve system, then your best bet is to remove these schedules and try setting the program again.
It will take a bit of your time, but removing schedules will get your unit working again.
Similarly, you can also try to reset the system to factory settings if the device is new. It will remove all the stored configurations, and you can start from scratch to set up your smart device.
So, just reset the B-Hyve system if removing schedules gets you nowhere with the issue.
- Check For Debris & Dirt
Grime and debris can also play a role in this issue with the smart irrigation system, where you won’t be able to secure any performance from the unit.
Even when the programs are working perfectly, if the stations are clogged up, you won’t see any water from the B-Hyve unit.
So, the only thing you can do is clean up the station and try engaging the smart system again. It should be enough to get the desired consistency from the programs.
- Inspect Wiring
Next, if there is no power in the system or the targeted station, just check the wiring cluster. Make sure that there is nothing damaged inside the wiring cluster and that there are no frayed sections.
Otherwise, you will have to replace the wiring, and the station won’t engage as long as there are power-related issues with the unit.
It is recommended that you seek help from an expert if you’re not that experienced in fixing wiring-related issues yourself.
This will be a bit heavy on your budget, but at least you won’t have to worry about the same problems again.
- Check For Hardware Issues
At this point, you need to check the unit for hardware damage.
There is not much that you can do at your end to fix the hardware issues. Sadly, it is far too common for owners to mess up the installation and damage the unit as they try to set up the system.
If you’re in the same boat and can’t seem to isolate the issue, just check for cracks, discoloration, or frayed sections on the unit.
If you do find any one of these pointers, then that will direct you toward hardware issues. There is not much that can be done here.
The only play that you have here is reaching out to the dealer. While this device might not be that reliable, the warranty sure is, and the dealer will provide you with a replacement.
If your claim is valid, you won’t have to bother with the hassle of reminding the dealer multiple times.
It will take a few days for the verification to complete, and you can make use of the new unit in no time. From there, you should hire an expert to help with the setup, and that will most likely be it when the irrigation controls are not working.
- Contact Customer Care Team
Lastly, even if you don’t have a solid warranty, you need to reach out to the customer care team. The support department maintained by this brand is pretty decent and will surely guide you through the intricate details of each troubleshooting step.
The best thing about asking the customer care team is that these experts will work closely on the issue, and that will make it much easier to isolate these errors.
From there, you can inquire about the possible methods to fix the programming errors as well as the hardware issues.
If the damage is not that severe, fixing the unit will come easy to you. So, be sure to set up the system after following the details mentioned by the customer care team. Hopefully, that will be it, and you won’t have to struggle with more errors down the road.
Wrapping Up
These specifics on the B-Hyve system not working should help you through many of the minor errors with the unit.
As long as you’re sure that the damage to the unit is not that severe, fixing the unit will come easy to you. From there, you can set up the system one more time.
It all comes down to how you’re planning on adjusting the situation. There are no quick fixes, and you will have to go through the majority of these methods to isolate the problem. From there, you can get through the fixes one more time.
It will barely take a few minutes, and you can adjust the system accordingly. Once the issue has been figured out, the rest will come easy to you.
However, if you’re not too sold on the idea of going through all of these fixes yourself, try calling an expert. He will take over this situation.Â