In spite of the fact that this information is not well known, installing smart door locks such as the Yamiry Keyless Smart Door Lock by yourself with a screwdriver is really rather simple.
However, since it is not commonly recognized and there is no true instruction book, it may be tedious and perplexing attempting to get things in place if you are not sure what you are doing.
Common Yamiry Smart Door Lock Problems Troubleshooting
Here are some frequent issues that arise with the Yamiry Smart Door Lock, as well as the solutions to those issues.
So that you may prevent the aggravation and confusion that might otherwise result.
- Not Responding to Touch
If the lock does not react when you touch it, you should first ensure that the Wi-Fi connection is operational.
Next, you should attempt to reset the lock by pushing and holding both buttons on the top of the lock for ten seconds.
It’s possible that you’ll have to repeat this action many times before it starts to have an impact.
Whether you are still experiencing problems, check to see if the Bluetooth feature on your phone is on and make sure that you are within a sufficient distance (within 30 feet) of your front door.
Between the two devices, you want to make sure there isn’t a lot of metal or anything else that may cause interference (such as steel doors or metal surfaces).
Check to see if there is an updated version of the lock’s firmware that you can install if you are attempting to connect with the lock but are receiving an error message.
In order to do this, first save the file containing the update to your computer, and then connect the lock to your computer with the USB cord that was included with the product.
- Not Connecting to WiFi
Try going through these steps if you are having problems connecting your smart lock to your WiFi network:
Make sure that the WiFi connection is active in the settings of your phone by checking the status of the connection.
- First, you should check to see if there are any other devices that are linked to the same network as your lock.
- It’s possible that they are what are causing the signal to be slowed down and preventing your lock from connecting. It could help to try turning them off completely or unplugging them for a little period.
- You may reset your lock by removing the batteries and installing new ones in it. After you have turned it back on, it ought to automatically rejoin with the WiFi network.
- In the event that this is not the case, open the app, go to the Add New Device section, and pick Yamiry Smart Lock. This software will look for your lock on any nearby WiFi networks that it can access.
- Select it when you are requested to, and then connect it by following the directions that appear on the screen.
- Whether you are still unable to get this to work, check to see if the WiFi settings on your phone are configured to automatically join networks.
- In the event that this continues to be unsuccessful, please get in touch with our customer care team so that they can provide further assistance.
- If there are many locks in close proximity to one another, it is possible that this step may need to be performed more than once (e.g., one at home and one at the office).
- Not Locking or Unlocking the Door
The yamiry smart door lock often has issues in which it will not lock or unlock the door, making this one of the most prevalent complaints about the product.
It’s possible that the lock has to be reset, the batteries are dead, or there’s a problem with the connection between your phone and the lock.
These are just a few of the potential reasons why this is happening.
To fix this problem, you may try resetting your lock by removing it from its mounting bracket, inverting it for ten seconds, and then reattaching it to the bracket.
This should cure the issue. At the event that this does not work, you will need to replace the batteries located in the rear of the machine.
If following these instructions does not solve your issue, you should turn off the power to both the device and your phone for a period of thirty seconds before turning the power back on to both of them.
Your lock will need to be reactivated as the last step in this process.
First, take the batteries out of the unit and put them away somewhere safe for at least five minutes before replacing them in the battery compartment that can be found on the back of the device.
After you have ensured that they are in the correct positions, activate your device (the app should automatically open).
Next, pick the option to Reboot by pressing the Device Settings button, which can be found in the lower right-hand corner of the screen.
To restart the device, press the “Restart” button. Your lock ought to be functioning normally once again at this point.
- Door Lock Is Jammed
It is in your best interest to ensure that the yamiry door lock is properly lubricated at all times.
When you attempt to open the door, this will assist keep it from getting stuck and preventing you from doing so.
In addition to this, it helps minimise the amount of friction on the lock, which in turn lowers the amount of force that is necessary to open and shut it.
You may lubricate your lock with common household items like WD-40 or 3-in-1 oil, but before you do so, you should check with the manufacturer first.
When you are applying these oils to the lock, prevent the area surrounding it from receiving any extra substance by using an old cloth or something like.
It is important to remember not to apply too much of the product since doing so can cause the mechanism of the door lock to get clogged with dirt and other debris if too much is applied.
After using the oil, if you discover that you have difficulty opening your door, you may try using a cotton swab that has been soaked in rubbing alcohol instead.
- Battery Issues
Battery life is one of the smart doors locks most often encountered concerns and one of the most prevalent problems overall.
If the lock on your door isn’t functioning properly, one of the first things you should do is determine whether or not the batteries have run out and need to be changed.
Take the batteries out of the device, and then put in two brand new batteries in their stead.
If you are unclear how long the old batteries have been in there, you should attempt to replace them a few months in advance in order to prevent any disruptions in the working of your locking system.
6. Broken Sensor
It’s possible that something on the sensor has broken, which would explain why you’re having difficulties locking and unlocking your door.
Examine your lock for any movable parts, and if you find any of them, use a screwdriver to secure them.
In the event that this does not work, you will likely have to replace the complete sensor unit.
However, before you do so, you should first check to see if the issue isn’t caused by another component of your lock, such as drained batteries.
If you have already tried changing every component of your device and the issue still occurs, you should contact customer care so that they may assist you in resolving the problem using their troubleshooting expertise.
- Yamiry Smart Lock Not Responding
The Bluetooth connection is the source of the vast majority of issues that arise with smart locks.
Check that the smart lock has been installed properly and that it has been connected with your phone if you are experiencing problems with using it.
If you have already attempted to re-pair your device or reset it, but none of these solutions has been successful, you might try restarting the smartphone or tablet that you are using to connect to the lock.
If rebooting the device does not solve the problem, you may attempt to connect to your lock using another device that has previously been associated with it.
In the event that this still does not work, it is likely that a third-party program was loaded on your phone or tablet inadvertently when you were downloading another app (such as antivirus software)
- Not Working When Hibernated
If your Yamiry smart lock does not seem to be functioning properly after coming out of hibernation, try resetting it by pushing its button for ten seconds until its light flashes white.
This should turn it off, and then back on again.
Does hibernation mode allow you to keep door unlock d for a period of several hours ?