5 Easy Ways You Can Fix Mirror Home Gym Not Turning On

There won’t be any exaggeration in saying that smart technology has brought advancements in every single department of our lives.

Now, users can even get smart mirrors, which offer plenty of benefits when compared to a normal mirror, especially during workout sessions.

However, it is common to run into issues every now and then while using the device.

Regarding this, plenty of users have complained that their mirror is not turning on. This issue is mostly related to the power side of things, and some owners also pointed out that they had to adjust the power supply.

Similarly, other users pointed out that the issue was more with the programming side of things and that you will have to reboot the system or go through with a quick reset routine to get the desired performance.

Hopefully, you will not have to deal with more errors down the road.

This is why today, we will be focusing on giving all the possible solutions to this particular problem. So, without wasting any more time further, let’s get right into it!

How to Fix Mirror Not Turning On?

1. Power Issue

The first reason why you could be having issues with your mirror not turning on could be because it is not getting the required power supply.

If it is running on a battery, then you have to make sure that it is fully charged or enough to be able to run.

Charging such devices can take a couple of hours before they can start working like they are supposed to.

Just make sure that they have enough juice to operate at full capacity. The issue might even be with the battery, and you need to test that out as well.

There are no surefire methods of testing out the battery if you’re not using any voltage-measuring device like a multimeter.

However, if it has been a few years since you last changed the battery in your smart mirror, then now might be a good time to do so again.

It will take you a bit of time to get through with these pointers, but you’re not left with many options.

So, be sure to follow along with all of these pointers, and you might just be able to save yourself a ton of hassle down the road. 

2. Try Power Cycling The Unit

Here, you just have to remove all power from the unit and then power it up again. This is one of the better methods when it comes to fixing minor programming bugs, and you will have a decent shot at fixing the issue.

So, all that you need to do here is to remove power from the unit and then keep the power removed for about 20 minutes.

This doesn’t mean that you can just reboot the system. Instead, you should get rid of the power connections and then power up the unit from scratch. 

You will not lose on any configurations, and the system has a decent shot of working properly after you’re through with this routine.

So, be sure to follow through with the power cycle method if you believe that the issue is more related to the programming side of things. 

It might even save you from the reset, and you can go about using the unit accordingly without having to deal with more errors down the road.

Hopefully, that will be it when you’re talking about the mirror not turning on, and these fixes will have you sorted in no time.

3. Check For Hardware Issues

Next, you need to check for hardware issues as well. There is a good chance that the unit is damaged if you’re not able to get any response from the system at this point.

It might be one of the more serious errors, and you will have to ensure the involvement of the experts here.

You will not be able to fix these issues on your own, and seeking the support of the officials might just have you sorted out here.

All that you need to do is to reach out to the dealer, and he will be more than happy to take charge of the situation. 

Just be sure to explain your end and then demand a new unit. As long as you purchased the unit from a reliable brand and dealer, it will not be that hard to get a replacement.

Most of the decent options on the market fully honor their warranty. 

However, things can be a bit challenging if you purchase this unit from a secondary market.

You might have to spend money on a new unit yourself. Still, there is no harm in reaching out to the official support team for the respective brands and securing their response on these issues.

On the other hand, if you’re sure that the issue is not related to the hardware, then you can follow along with the reset routine.

This method might not be preferred by some users as this will get rid of all of the configurations, but you’re not left with many choices here.

4. Resetting the Mirror

If you are sure that there isn’t any power-related issue, then you can try resetting the device to see if that does anything. If you aren’t aware of how you can reset a mirror, then follow these instructions:

1. Start by removing your mirror from any power source, i.e., charging.
2. Hold down the power button found on the device for more than 10 seconds.
3. You can try rubbing the mirror sensor by making use of a cloth and rubbing alcohol.
4. Ensure that you don’t place anything in front of the mirror.
5. Hold down the power button for more than 10 seconds.
6. Make sure that the mirror stays put for a minute so that it can successfully complete the reset process.

After a whole minute has passed, your mirror should start functioning again.

5. Connectivity Issues

We have also seen cases where the mirror did not turn on simply because of a connectivity issue. We strongly advise you to make sure that you have a reliable connection.

It is possible that you might be having some sort of network problems which could be causing your mirror to not turn on.

In either case, you can start by restarting all of your devices. This includes restarting your modem/router, and the mirror.

At the same time, we also suggest that you make sure to have the latest version of the app installed on your phone.

6. Going Through the Setup Again

There’s a good chance that you might have messed things up during the setup process.

If that is so, then we recommend going through the whole process again. Your mirror should come with a full manual guide that lets you know how you are supposed to configure the device.

7. Contacting Support

Another thing that you can try is to get in touch with the support team. It is likely that you might be facing a more technical issue. In such cases, there isn’t much that you can do on your own.

Instead, what we recommend you do is ask the support team for further help on the matter.

There is no point in spending hours of your time trying to adjust the unit when you’re not even sure about the issue.

So, if you’ve not been able to grasp the situation up to this point, it is a good idea to reach out to the dealer. He will inquire about your issue and then guide you accordingly through a fix.

The team could ask you to send them the unit for further inspection, as it could be that you might have received a faulty unit.

It is also possible that there might have been some kind of damage to the mirror that is preventing it from working. In either case, the team should help you get it fixed.

The Bottom Line:

Annoyed with having your mirror not turning on? Whenever you notice any such problems, you should start by checking the power source of the device.

It will help you figure out the situation, and you will not have to worry about more errors down the road. 

But if the issue is more technical, then we recommend giving this article a read! It has all the different ways you can successfully troubleshoot this particular problem in detail.

If you’re lucky, quickly rebooting the unit and then going through with a reset routine will have you sorted.

Instead of wasting hours of your time, you can follow through with these methods, and you’re sure to get a reasonable response from the unit.

However, these fixes will only help you out when you’re sure that the unit is not damaged. 

If there seem to be hardware issues with the unit, then your hands are pretty much tied. You will have to reach out to the dealer or engage the officials working in the customer support section.

They will help you through this situation, and you might just be able to fix the system.