6 Ways To Fix Eufy Auto Lock Not Working

You have activated the auto lock feature on your eufy gadget; however, it appears to remain in the on position.

You press the button on the remote, but nothing occurs; you even put in fresh batteries, but the brand-new auto lock unit on your door still does not respond to your actions.

Do not be alarmed if you are experiencing this problem; it is in fact a fairly frequent problem with these gadgets, and the solution is not difficult in the least!

Fix Eufy Auto Lock Not Working

Right now, we are going to walk you through the troubleshooting and repair process for your eufy auto lock that is not functioning.

1. Check the Batteries

One of the most typical causes of a eufy auto lock failing to function properly is a need for new batteries.

When a battery begins to lose its charge, it may cause a variety of concerns, including problems with the remote control and with your ability to enter and exit your home.

You are going to want to give new batteries a go as soon as you can if you want to have this issue fixed.

This is a simple solution that, in addition to fixing the issue at hand, should take care of any other small issues that you may be experiencing with your Eufy doorbell camera.

The procedure for replacing anything is not too complicated. You will first need to remove the back plate, then remove the old batteries, then replace the old batteries with new ones.

Lastly, you will need to reinstall the back plate. Your gadget should start functioning normally after this is finished.

2. Enable Auto-Locking

Even if there is a possibility that there are further causes for this problem, the first thing you should do is check to see whether the auto-lock option is activated.

Whether you want to use this feature and it isn’t working for you, check to see if it is enabled first since it isn’t enabled by default.

Whether not, switch it on and test the lock to see if it is now functioning properly once you have done so.

You may verify that your Eufy lock is working properly by securing the door for about three minutes, after which you will check to see whether it is locked.

Are you having trouble figuring out how to activate the auto-lock feature on your Eufy smart lock?

In such case, read on for instructions on how to verify and activate the auto-lock feature on your Eufy smart lock:

• Launch the Eufy Security application on the mobile device you’re using.
• Choose “Lock Settings” on the smart lock device tab, and then click “Auto Lock” when prompted to do so.
• You’ll see a button right next to the phrase “Auto Lock.” Check to see whether it is turned on or off. Move the switch to the “on” position if it is not already in that position.
• In addition, if the auto-lock feature is on, turn it off and then turn it back on again.
• Check to see whether it is now functioning properly, as was previously suggested. If the issue is still present, go to the next stage in the process.

3. Try To Calibrate It

Calibration of the lock is another potential solution that may be tried. This repair is advised by Eufy, and it is often effective in helping to alleviate some of the lock’s operational issues.

Calibration of your Eufy smart lock may be accomplished by following these steps:

• Before you can calibrate the lock, your door has to be closed completely. In order to prevent getting locked out of your home, check to see that the door is closed and that you are already inside.
• Launch the Eufy Security app and go to the “Lock Settings” page. Next, choose “Lock calibration” from the menu.
• To confirm that you have shut your door, tick the box next to it.
• To finish the procedure, you will need to tap “Calibrate the Lock.”
• This is how you calibrate your Eufy lock, and it ought to do the trick—it should resolve the problem with the auto-lock function. If not, however, go to the next step.

4. Update The Software

The program has to have the most recent update installed, as your initial step. Launch the Eufy Home app, choose Manage from the menu, and then choose the option to Check for Updates.

Tap the Update button to check for available updates, then agree that your device will be updated when prompted.

Once the update has been successfully installed, you will need to restart your device by holding down the power button for a period of 15 seconds.

Test the lock once again when it has finished restarting. If you want any more help, please do not hesitate to get in touch with our customer support department.

5. Restart The Eufy Lock

One common remedy to small problems with smart devices is to just restart them.

If the auto-lock feature of your Eufy smart lock is still malfunctioning, you might try restarting the lock to see if it resolves the issue.

If your Eufy smart lock needs to be restarted, you may do it by pressing and holding the reboot button for around 5 seconds, which is located at the lock’s base next to the USB port.

As soon as you realize the lock is resuming, let go of it. Don’t stop here if you need further assistance; go on to the next section.

6. Reset with The Reset Button

If you are experiencing problems with the operation of Auto Lock, consider going through these steps:

• Disconnect your Eufy auto lock from its charger and unplug it from the power source where it is normally kept.
• On the underside of your Eufy auto lock, there is a button labeled “Reset.” You may use a toothpick or another similar device to push this button (it is inside a small hole).
• After you have replugged in your Eufy auto lock and waited the entire ten minutes for it to charge, check to see whether this has resolved the problem.