Braeburn Thermostat Is Stuck At 80: 6 Causes

braeburn thermostat stuck at 80
braeburn thermostat stuck at 80

Facing issues with your thermostat can be one of the most annoying things to deal with. Still, if you do end up experiencing any trouble with these devices, then you will need to know how you can troubleshoot them. For this purpose, we will be using today’s article to tell you all about how you are supposed to fix a particular issue regarding the Braeburn thermostat. More specifically, here are all the steps that you will need to follow for fixing the Braeburn thermostat getting stuck at 80:

How to Fix Braeburn Thermostat Stuck At 80?

  1. Resetting the Thermostat

The safest way you can troubleshoot any such problems is by resetting the thermostat. To do this, you will have to press the reset button found on the front panel of the thermostat.

To reach the reset button, you will have to use a device like a paperclip, or a toothpick through which you can press the button. Once you do, your thermostat should successfully reset. Do keep in mind that this will wipe out any stored settings inside the thermostat.

  1. Checking the Power Supply

While it is unlikely, there are still chances that you might be experiencing this problem because of the power supply. If that is the case, then you will need to physically inspect the power supply for anything that might be out of order.

Start with checking the batteries and making sure that they are fully working. You may have to opt for replacement batteries in case they aren’t working. Similarly, check the fuse for any possible problems as you have to make sure your thermostat is getting enough power to fully operate as it should. If you do have a blown fuse, you will have to get it replaced.

  1. Incorrect Installation

There’s also the possibility that the thermostat hasn’t been installed correctly. Though if that is the case, then you will have to ensure that you redo the whole installation process. Try referring to the user manual guide while you are installing the thermostat.

Also, when you are dealing with any wires or connections, make sure everything is properly secured at its place. Any kind of loose or faulty connection can cause all sorts of issues.

  1. Getting Help from Professionals

If you are having a hard time trying to do the troubleshooting on your own, then it is highly recommended that you get a professional to do the whole thing for you. After calling in a technician at your home, let him assess the situation and check the thermostat.

As he should have far better knowledge regarding the thermostat, he should be able to let you know exactly the kind of issue that you are facing along with how you can fix it.

  1. Contacting Support

Apart from reaching out to a local technician, you can also try contacting the support team. After giving them details about the issue that you are facing, they should give you further solutions on how you can resolve the problem for good. Just be sure to act as cooperative as you possibly can.

  1. Getting it Replaced

If the issue persists, then there’s a good chance that you have been dealing with a faulty device. In such cases, you won’t be able to do anything about it on your own. Instead, the only possible solution would be to get a brand-new unit as a replacement.

However, it is worth mentioning that this should cost you quite a bit which is why we recommend keeping this option only as a last resort.

The Bottom Line:

If your Braeburn thermostat is stuck at 80 for some reason, then we strongly advise following all the troubleshooting steps that have been listed right above. Likewise, if you are having trouble keeping up with these instructions, then all you need to do is to leave down a comment below! We will be sure to reach out to you as soon as we possibly can.

Leave a Comment