Bissell units are a bit bulky and bring a durable frame to the owners. Even if the operating conditions are a bit harsh, you won’t have to worry about the performance of these devices. As long as the battery condition is good, the SmartClean system will keep working perfectly. However, if there are any charging issues or the battery is not installed correctly in the cleaning unit, then you will have to get an immediate replacement.
The Bissell SmartClean system will present you with the E6 when there are battery or power issues. So, if you’re in a similar situation with the Bissell SmartClean system, try following through with some of these methods.
How to Fix Bissell Smartclean E6 Error?
- Check Battery Placement
First and foremost, you need to check the battery placement and make sure that the battery pack is in the correct orientation. Match the positive and negative terminals of the battery pack with the recommended guidelines on the unit, and that should be it when it comes to battery placement issues. Even if you’re sure that there are no problems with the placement of the battery pack, it is a good idea to reinstall the battery and check for debris on the contact points.
- Fully Charge The Unit
At this point, you should also fully charge the device and then the response from your unit. If you’re sure that there are no issues with the voltage output from the source, just charge the device properly. That should be it when it comes to E6 error, and once the charging status is perfect, you won’t have to bother with the same issues.
- Inspect The Condition Of the Battery Pack
The condition of the battery pack also has a role to play here. If the condition of the battery pack is rough or it has been in use for a long period, then now might be a good time to purchase a replacement. It won’t be that heavy on your budget, and you will enjoy decent performance over the next few years.
- Use A Different Outlet
The E6 error can also be related to insufficient voltage supply from the outlet, and you need to isolate the issue by using a different outlet. Just connect the docking station with a different outlet and let it charge for a few hours. From there, you can test out the performance one more time, and the Bissell SmartClean unit should respond accordingly.
- Check The Charging Base
The charging base is the next thing that you need to check here, and if there is residue on the base or the station is damaged, you will have to order a replacement. There is no point in trying to repair a damaged outlet, and you can browse through the official Bissell portfolio to source a replacement.
- Make Sure The Robot Is Turned On During Charging
This cleaning unit won’t charge properly if the device is turned off on the charging station. You need to make sure that the power button on the SmartClean system is in the on position and then let the device charge for a few hours. Ideally, the issue should be fixed here if your Bissel unit is not damaged and the purchase was rather recent.
- Check For Hardware Issues
Hardware issues can be pretty serious, and if your usage is too rough, you might be in the same situation. There is nothing much that can be done about these issues, and claiming the warranty is the best move to play here. It is true that the Bissell units are one of the most durable devices on the market, but long-term exposure to rough conditions can damage any unit. So, make sure to check for hardware issues, and then call someone from the official support.
- Contact Bissell Support
You can also get help from office support, and they will assist you through every step of the troubleshooting process. It will become much easier to isolate the problem with the help of Bissell support. Moreover, you won’t have to waste hours of your time trying to manage the device. So, make sure to reach out through the official support, and hopefully, that will be it when it comes to E6 error codes with the Bissell SmartClean system.