The HomeKit integration with the WeMo system is one of the main selling points of these units. However, some owners did point out errors like “cloud data sync in progress” with the HomeKit system. You won’t be able to access the smart devices during this time, and the schedules will get glitched during this time. Furthermore, you won’t be able to customize any commands until this issue is addressed.
Luckily, it is not that difficult to quick fix this issue, and your primary focus should be on the iCloud account as well as the network connection to your smart units. The following troubleshooting methods should give you a thorough understanding of how to fix the WeMo cloud data sync in progress errors.
How to Fix WeMo Cloud Data Sync Is In Progress?
- Go Over iCloud Configurations
The cloud sync errors are directly related to the issues with configurations on your iCloud account. For the sync to work perfectly, you need to make sure that Home is enabled along with Keychain features in the iCloud account.
Just browse to the iCloud settings and verify that both of these options are enabled, and then try accessing your smart system again. Sometimes, you’ll just have to wait for a few hours for the sync to complete because of server issues. So, there is no need to be impatient, and it is a better idea not to mess with the current settings if the units have been working perfectly up to this point.
- Relink iCloud Account
Many owners mentioned that they had to relog into their iCloud account to address this issue with the WeMo cloud data sync in progress. So, if you’re sure that the issue is on your side and the servers are working perfectly, just log out of your iCloud account. Wait a few moments, and then log back into your iCloud account. Try syncing up the HomeKit system with your iCloud again, and it should work at this point.
- Check Your Network Connection
The possibility of network issues always exists, and there is a good chance that you’re just dealing with a poor connection. You won’t be able to sync the data to iCloud without a proper internet connection. So, if your router is placed in a different location, try to bring it closer to your smart system and power cycle it once.
This will refresh the network connection and hopefully address minor network bugs with the system. After that, you can pair up the network with the smart devices again and then check the progress of the iCloud sync.
- Re-enable iCloud Keychain
Bugged Keychain security features can play a huge role in this issue, and owners pointed out that they were able to address this complication by removing the iCloud Keychain from their accounts and then adding it again. So, if you’ve not been successful with any of the methods mentioned above, then now might be a good time to disable the Keychain features temporarily and then test out the sync progress through HomeKit.
- Check The iOS Version
An outdated iOS version will always create problems with the sync, and you need to make sure that your mobile device is on the latest version. It can take some time to update the device, but if you’ve not updated the iOS in a while, then you should do it immediately. You can further rely on a different mobile device to check the progress of the sync from HomeKit to the iCloud account. Hopefully, this will address the syncing progress errors, and you’ll be able to access your smart devices without further complications.
- Contact Support
On the other hand, if you’re still stuck in the same problems and you’re sure that there are no problems with the intent connection, then you should involve an expert from customer support. The professionals working in the customer support department will help you narrow down the issue, and you won’t have to waste as much time in the troubleshooting process.
Ideally, the issue should be fixed once you reboot the router and re-log in to your iCloud account. However, if the problem persists even after waiting for a few hours after you’ve tried all of these fixes, then contacting support is the only option left.