As far as the automatic features are concerned, the Samsung Powerbot is one of the better brands in the market. Even though customers complain about Samsung Powerbot not working every now and then, you will still get decent performance when comparing this unit with other brands. Most of the issues with Samsung Powerbot are easy to fix and don’t require any extensive replacement procedures.
The following troubleshooting guide on Samsung Powerbot not working is intended to help customers get the optimal performance from their cleaning robot. If you’re also struggling with the Samsung Powerbot, then these methods should help you fix the cleaning robot.
How To Resolve Samsung Powerbot Not Working?
- Clean Sensors
The performance issues with Samsung Powerbot are primarily caused by dirty sensors. The maintenance requirements are clearly mentioned in the owner’s manual, and you should clean the unit at least once every month. Otherwise, these issues switch the Samsung Powerbot not working are inevitable.
To clean the sensors, you can just use a soft cloth and gently wipe away the debris. Using excessive force can damage the sensors, and you will have to buy a replacement if the sensors are damaged.
- Fix Battery Malfunctions
The battery malfunctions are another major reason behind Samsung Powerbot not working. You will occasionally get this error when the wiring connections are damaged, or the battery is not installed properly. So, if the unit is running into these errors, inspect the battery compartment immediately.
Ideally, fixing the orientation of the battery will fix everything, and you won’t have to deal with the wiring. However, if you’re sure that the battery is new and it is installed properly, then it might be time to take a look at the wiring.
- Fix Brush
A dirty brush is next on the list of possible reasons behind Powerbot not working. Excessive debris and hair can get caught up in the brush and restrict the movement of your unit. So, if you’re not dealing with any of the problems mentioned above, check the status of your brushes next.
To clean the brushes, you would need to remove them from the Powerbot. After that, just wipe away all debris from the compartment and remove entangled hair from the brush. Once that is done, put everything back into place and test the Powerbot from Samsung.
- Power Cycle Unit
Power cycling the unit might seem like an obvious step, but it is one of the most effective methods of removing minor issues from the system. So, if your system is clean and there is nothing entangled in the brush, try to power cycle the robot completely.
All you need to do is remove the battery connection for around a minute and then put the battery back into the robot. It will take a while for the robot to turn on, but once it starts functioning, you won’t run into performance issues again.
- Check Driving Wheels
The debris can also lock up the driving wheels on your setup. So, after the brushes, you should also inspect the driving wheels for possible issues. While it is not a good idea to completely remove the driving wheels, you can rely on air blowers to remove the excess dirt from the driving wheels.
Once the driving wheels are cleaned, test out the performance of your Powerbot again. There is a good chance that the Samsung Powerbot will start functioning at this stage, and you won’t have to bother with other solutions.
- Reset Samsung Powerbot
Resetting the Samsung Powerbot will remove all the configurations from the unit as well as the smart system. So, you will have to set up everything from scratch after resetting the robot. For this reason, you should make sure to go through other steps before relying on this method. Once you’ve exhausted your options, then your last step should be to reset the Powerbot.
You can rely on the emergency power switch to reset the Powerbot. All you need to do is flip the switch to 0 positions for a few minutes before turning it back to the engaged position. That should reset the bot, and you will have to reconfigure everything with the Powerbot. Hopefully, that should fix all bugs in your robot.