While Foscam is one of the pioneers when it comes to the latest devices in the market, you can’t expect much from these units in the current competitive environment. There are much better options available in the market, and these cameras are becoming more and more obsolete. So, if you’re thinking of upgrading the smart security setup in your household, Foscam is not the perfect option for you.
There has been a massive increase in the number of complaints about Foscam network errors. It can be pretty annoying to fix this communication error permanently, and you will occasionally run into this problem. So, let’s go over how you can go about solving this error.
Foscam Network Error
- Check The Firewall
The most common reason behind the network issues in Foscam is the firewall configurations. To fix this problem, you will have to check the firewall settings and remove it for a brief moment to get the desired performance. If the issue gets fixed after removing the firewall, then you will need to go over the firewall rules before enabling it again.
Once you’ve allowed access to the camera, enabling the firewall is a safe move, and you won’t have to deal with any extra network errors.
- Power Cycle Router
Sometimes the bugs in the network can create similar situations. So, even if you’re sure that the network is working perfectly, these issues can present themselves out of nowhere. The only thing you can do here is power cycle the router, and it should remove all of these problems.
Once the router is power cycled, try to connect your cam again, and the network error will be fixed. It will only take a few seconds to power cycle the unit so make sure to test your luck with this option.
- Check App Configurations
The app configurations can also play a role in network issues. Make sure that you’re connected to the right network, and there are no internet-related issues. There have been a few reports where users were running into this issue because of network extenders.
If you’re in the same boat, then you have to connect the smart camera with the main router. Otherwise, it won’t work, and the camera will run into a network error again. So, remove all extensions and connect the camera directly with the router installed in your home.
- Fix Port Number
The port number and the current bit rate on the device are other potential causes of this problem. So, make sure that the bitrate allowed through the port is sufficient and matches the network requirements of the router. If the bitrate is not enough, then changing the port or reconfiguring the router is your best bet.
Call the network provider if you’re confused about how to manage the bitrate configurations on your router. He will guide you through the procedures, and you won’t have to put extensive time into troubleshooting the error.
- Increase Signal Strength
After checking the port numbers, you can also increase the signal strength by moving the router closer to the camera. It is a simple fix, but many owners were able to fix the Foscam by simply increasing the signal strength. So, if your router is far away from the camera, it is a good time to relocate the router.
Make sure to also power cycle the camera before reconnecting it with the router to eliminate any network-related issues with the device. Hopefully, everything will work once the signal strength issue is addressed.
- Reset Router
If the issue is not fixed at this stage, then it is time to reset the router. This should be your last option, as resetting the router will remove all smart devices from the network. So, you will have to potentially spend hours trying to reconfigure everything with the router again.
However, if none of the methods mentioned above have worked out for you, then resetting the router is a good option. Just make sure that the router is within the range of the camera and there are no extra devices between the router and the camera. For further support, you can always reach out to the customer support experts. They will help you better isolate the problem.