The Samsung Aqua jet relies on both cold and hot water to get through the cleaning cycle. You can easily configure auto temperature options to find the best fit for your clothes.
So, you’ll have to link both cold and hot water lines to your unit.
The installation might be a bit difficult for these valves and can be challenging for some owners. It is a good idea to avoid installing the unit yourself and seek help from a professional.
He will make it effortless to get through the installation procedure.
Otherwise, you will run into situations where the Samsung Aqua Jet washer will not be filling up with hot water. This situation will only impact the cleaning performance of your machine.
Samsung Aqua Jet Washer Not Filling With Hot Water
Luckily, there are a few things that you can check to get ahead of these issues. So, if you don’t want to hire an expert, try keeping these pointers in your mind.
- Check Cycle Configurations
Before anything else, you need to check the cycle configurations. The issue might just be with faulty configurations and cycle settings.
So, you need to isolate the issue with the washer and then act accordingly to address these issues. Ideally, you need to make sure that the temperature settings are set over 60 degrees.
Mostly that will be enough to engage the hot water line, and you will be able to fill up the unit with hot water.
So, if you’re sure that the basic configurations are managed appropriately, just check the cycle settings. That will likely isolate the issues with Samsung Aqua Jet Washer not filling with hot water.
- Check Heater Capacity
The heater capacity might also be to blame here. If the washer is new and all the connections were installed by an expert, just check the capacity of your heater.
You need to make sure that the heater can keep up the hot water supply for more than five minutes.
If you have a weak heater installed in your home that won’t engage with the washer, then that is likely the issue. You need to reconfigure the heater or consider an upgrade.
If there is no water in the line, you can’t expect the washer to draw the hot water.
- Try Using Deep Fill Features
The deep fill features through the washer will also help you overcome minor configuration errors.
Many users pointed out that they had to cycle out of deep-fill features and then turn on these features one more time to engage the machine.
Here, your main focus should be on refreshing the cycle configurations.
Try turning on the extra rinse features as well. Extending the cleaning cycle will help you fill the washer with optimal water level and temperature.
- Check For Inlet Damage
The inlet damage can also impact the water supply to the washer. If you’ve moved the washer to a new spot, then try to inspect the condition of the inlet.
Make sure that it is in perfect shape and not clogged up. You will have to remove the main valve to get a closer look at the inlet.
If the inlet is indeed damaged, try calling a local plumber for a quick fix. However, if your unit is new, it might be a better idea to claim the warranty.
This is especially true if you got a damaged unit out of the box. The dealer should provide you with a replacement if the claim is indeed valid.
- Fix Water Pressure From Hot Water Valve
The water pressure from the hot valve can also be at fault here. You need to isolate the issue with the hot water valve by removing the washer and inspecting the pressure.
If opening up this valve brings a low pressure to the unit, then you’ll be sure that the water supply is to blame here.
Once this issue has been isolated, the rest is easy. You just have to find a better spot for the healer, clean up the water lines, and re-engage the hot water system.
A professional will do a better job here when you’re not that experienced with the washer.
- Try Replacing The Filters
The filters should be replaced after every few months. Once these filters are clogged, you won’t be able to get any response from the washer.
So, isolate the issue by installing new filters. The replacement is pretty cheap and easy to install.
You can also choose to rinse out the filters. The performance won’t increase by a huge margin, but it might just be enough to fill up the washer.
So, while you wait for the new filters, clean out the current ones and then install them again.
- Check For Error Codes
You need to also keep track of error codes through the main display. If the unit is presenting you with programming errors, then a factory reset might be imminent.
You can further try to power cycle the machine as the last shot to fix the programming bugs.
However, if the issue is related to a faulty main board, you won’t be able to do much here. Just make sure to match the error code presented on the screen with the manual.
That will give you more perspective on the issue and how you can fix it.
- Request Help From Samsung Support
You can reach out to Samsung customer support directly. These experts bring years of professional knowledge to help you get through any and all issues with the washer.
All you have to do is to submit a support ticket. You can also call the customer care line.
Once you’ve explained the error in complete detail, they will help you narrow down the issue. You can also forward a warranty claim here if the unit is defective.
So, work with these professionals to isolate the issue. They will guide you through each step of the troubleshooting process.
Hopefully, you won’t have to wait for a new unit, and the current washer will be fixed in no time!