The best thing about Levoit Humidifier is its extensive up time. You won’t have to worry about a refill for over 16 hours, and the unit will work perfectly with the larger water tank. Even with this huge frame, you will get a sleek design, and it will fit right into your existing smart setup. So, make sure to go with Levoit Humidifier if you want a unit that will outperform the majority of other options on the market.
While it is one of the most consistent and reliable humidifiers on the market, users can still run into complications like Levoit Humidifier Not reading humidity correctly. Mostly, this issue can be traced back to incorrect placement, and here is how you can maneuver through the situation.
Levoit Humidifier Not Reading Humidity Correctly
- Check Humidity Sensors
One of the first things that you need to do is to clean the humidity sensors. Most of the time, owners are just ignoring the care requirements, and the sensors won’t work properly when there is a layer of dirt on top of the sensors. So, if your Levoit Humidifier is not reading the humidity correctly, then you’re likely in the same situation.
Ideally, you should be cleaning the unit every two weeks if you wish to enjoy the consistent performance. However, if you have ignored the maintenance for more than three weeks, then that is likely why you are not able to get accurate humidity levels. So, just clean up the dust and check the performance from your Levoit Humidifier.
- Change the Location Of Your Humidifier
The location of your humidifier has a huge role to play when it comes to reading the humidity levels correctly. If the unit has been placed too close to a wall, then you won’t be able to get an accurate reading. So, you have to change the location of your humidifier and try to place it close to the center of the room.
This won’t only help with the humidity reading, but you will also notice a better performance out of your Humidifier. So, just change the location of your humidifier and then check the response from your sensors. Hopefully, the issue will be fixed at this stage if your unit is not bugged.
- Power Cycle Humidifier
At this point, your best bet is to remove power from your humidifier and then resupply it after waiting for a few minutes. While minor programming bugs are pretty rare, there is still a possibility that you’re running into these issues. So, to eliminate this possibility, just remove power from your Levoit Humidifier and then resupply power after waiting for a few minutes. Hopefully, that will be enough to get your unit working perfectly in no time.
- Check Room Size
When the room size is too large, the unit is not able to accurately judge the humidity levels. You have to stick between the range of 40 to 60 sq. meters when picking a room for your humidifier. So, if your room is massive, there isn’t much you can do about the inaccurate reading except purchase a better humidifier that provides support for larger regions. So, simply check the room size and move the unit to a smaller unit.
- Reset Levoit Humidifier
If you’re still stuck in the same issue even after going through all of these fixes, then you have to reset this humidifier. All you have to do is to hold down on the power button for a few seconds and remove it from the connected devices. The method can vary depending on the Levoit humidifier installed in your house, and you need to check the owner’s manual to narrow down on the complete reset guide.
- Contact Customer Support
In case of hardware issues, your only option is to contact customer support regarding these issues. There is a good chance that the warranty will cover these damages, and you will be able to secure a replacement in no time. So, try reaching out to the official support members and have them help you around these complications with the Levoit Humidifier not reading the humidity correctly. Hopefully, you’ll be able to avoid the hassle of spending hours in the troubleshooting process by seeking help from these experts.