Although dimmers are a great device that can be used to give a great lighting experience, they can still often run into all kinds of errors. Speaking of which, the Leviton DSL06 is an exceptional dimmer that comes with its own set of problems.
With that said, if you also seem to be encountering an issue where your Leviton DSL06 is not dimming the lights, then here are a few things that you can try following for resolving the error for good.
How To Fix Leviton DSL06 Not Dimming?
- Check The Compatibility Of The Bulb
If the Leviton DSL06 is not dimming, then the first thing that you need to check is the compatibility of the dimmer with the light bulb. In case, the light bulb does not support the dimmer, it will not allow it to dim the bulb. Therefore, ensure the compatibility of the bulb with the dimmer. To do so, check the packaging of the bulb. If the specs state that the bulb is dimmable then you can use the bulb with the Leviton DSL06, else it is suggested to change the bulb with an LED fixture that supports the dimmer.
- Check Power Supply
If the dimmer and the bulb are compatible with each other, but the problem still continues, then it is recommended to check the power supply. Sometimes, due to overheating of the dimmer, the wires connecting it with the bulb are melted. Due to this reason, the Leviton DSL06 is not able to dim the LED fixture. For this reason, open the electric panel where the wires connect the bulb and the dimmer. If the wires have been melted, you will see that the wires are not connected to the terminals of the dimmer. In such cases, first, check if the wires are still working or not. use a multimeter or a voltmeter for this purpose. If they are working efficiently, then simply reconnect the wires with the terminals of the dimmer.
Another possible cause can be that the dimmer was not properly installed. In such cases, you can hear the cracking voices from the wiring behind the dimmer. To solve this issue, follow the steps given below in order to fix the dimmer:
- Firstly, turn off the power supply.
- Unscrew the dimmer from the outlet.
- Remove the dimmer from the outlet.
- Observe the wiring and search for the loose wiring of the dimmer.
- Once the loose connection of the wiring is found, remove the wire from the terminals of the dimmer.
- Twist the wire to make it clean and then reconnect it to the terminals of the dimmer.
- Secure the dimmer into the socket and turn on the main power supply.
Finally, check the dimmer if it is working properly or not. In case, you are having a hard time following the instructions given above, then it is suggested to contact an electrician instead. He will help you get rid of the problem.
- Damaged Or Faulty Leviton DSL06
It is also possible that the dimmer is faulty or damaged due to which the Leviton DSL06 is not able to dim the light fixtures. In such cases, there is not much that you can do about it other than replace the dimmer with a new one. You can get a free replacement unit if the dimmer is still under warranty. On the other hand, you will have to pay a few bucks for the replacement of the damaged dimmer.
- Contact Customer Support Services
If none of the above-mentioned solutions work for you, then we would suggest you contact the customer support services of the Leviton company. However, kindly follow their instructions with patience to fix the problem quickly.
The Bottom Line
All in all, Leviton DSL06 is one of the best dimmers available out there. However, it can cause problems while dimming the light fixtures. We have provided you with everything you need to fix the problem. We hope that you find our article helpful. For more information, go through the article mentioned above.