While there is no debate that cleaning robots make your life so much easier, dealing with minor bugs and hardware issues can be pretty annoying at times. Brands like Lefant maintain a decent reputation when you’re talking about affordable and effective cleaning devices. However, even these devices can malfunction from time to time.
Recently, some owners have come forward with issues about the Lefant Robot vacuum not charging. Most of the time, this issue is related to the power supply and a damaged adapter. So, here are some fixes to help you along the way.
How to Fix Lefant Robot Vacuum Not Charging?
- Check Power Supply
The power supply is one of the main reasons why you might be running into this issue. So, instead of looking at the charging station for hardware issues immediately, just check the power supply one more time. You need to make sure that the power supply from the voltage matches the requirement of the docking station. Ideally, changing to a different outlet will help you isolate this issue.
If the robot starts to charge after you change the outlet, then you should call an electrician to help with the management of your electrical connections. You shouldn’t try to fix these connections yourself, and seeking help from an expert is the only reasonable choice. So, call a technician and get your connections fixed immediately.
- Clean Charging Contacts
If you’re sure that the power from the outlet is optimal, then just check the condition of the contact points. It is not too rare for the contact points to get dirty over time, and the only thing you can do is clean them with a fresh cloth.
On the other hand, if there is rust on these contact points, you will have to rely on a rust cleaner from the market. Hopefully, that will be it when it comes to charging issues with the Lefant system.
- Inspect The Power Adapter
At this point, you should just check the power adapter for possible issues. There is a good chance that your adapter or the power cable is damaged. You can’t do anything yourself to fix a broken adapter, and getting a replacement is the only real move here. So, instead of changing the orientation of your adapter, just grab a fresh replacement. Hopefully, that will be it when it comes to charging issues.
- Let The Base Cooldown For The Next Two Hours
The issue might just be related to extreme operating temperatures and if you live somewhere with harsh environmental conditions, just let the robot cool down for a few hours before putting it on the charging station. Moreover, it is a better idea to start the cleaning cycles later in the evening to avoid these heating issues.
- Check For Hardware Issues
If the charging problems persist at this point, just check the device for hardware issues and then reach out to the dealer. Depending upon the purchase status, you can get a free replacement by claiming the warranty. So, just call the dealer and explain the situation to forward a warranty claim. After the verification, you will be able to secure a new device that won’t run into the same charging errors.
- Get A New Battery
Sometimes, the battery is also at fault here, and you can isolate the problem by charging the battery. If you’ve had the device for over two years, then the only reasonable thing that can be done here is to get a battery replacement. This won’t only address the charging issues, but you will also be able to enjoy a longer run time with this unit. So, install a new battery and then check the response from the official support.
- Seek Help From Customer Support
Seeking help from official support can make the troubleshooting process pretty simple for most owners. If you’ve yet to narrow down the problem, try to call someone from the official support team. They will help guide you more effectively through the troubleshooting methods. If the issue is not related to the hardware, you will be able to fix the device within a few minutes. So, make sure to either send them an email or contact the company number during working hours.
My 501B keeps saying, “Start Charging,” over and over, but doesn’t seem to charge.
My lefont vacuum won’t charge the red light keeps coming on when I put it on the charging station I only have had it since Christmas 2022
The robot will not charge before switching on (on/off switch on the side)