Most people are not aware of the numerous benefits that can be realized after using a water softener. The usefulness of this device depends upon the quality of water in your area. If the water in your area has high ratios of magnesium and calcium then you should probably think about buying a softener for your home.
A power outage can create issues with your water softener, most of the time these issues can be resolved with a quick reset to the device. So, if your softener is not working after a power outage then you can reset your device by following these steps.
How to Reset Water Softener After Power Outage?
Ideally, you shouldn’t have to reset the whole device even if the power has been out for a long time. The only problem that can be caused by a power outage is that the clock on your device might be off sync. This can cause the scheduling to malfunction; all other settings will remain the same and the device will perform its job without any issue.
Even if the clock is off sync, you will keep getting a soft water supply when the power is turned back on. The only problem is the regenerations that can occur off schedule. So, just reset the clock following the manual when the display is flashing and that’s it.
But if you want to reset the water softener to factory settings then you can do so using the controller. Hold down the SET button for around 30 seconds and you will notice the display will start flashing. At this point set the mode to SOS and then press the SET button again. Now, the device will reset and you will have to put in all the configurations again. This includes the hardness levels and the regeneration times according to the clock on the controller.
Still, a power outage should not be that much of a problem for your water softener. So, if your water softener is not working after a power outage then there are likely some issues with the device or with the power supply. You can use a voltmeter or multimeter to check if the water softener can draw power from the circuit. If no reading shows up on the voltmeter, then you need to check your breaker connections or use a different outlet for your device.
Depending upon the brand of water softener you’re using the reset methods can be different. So, if you can’t get the device to reset after using the controller, then you can always ask representatives from the brand you’re using to help you. They will connect you to experts that can get your device to start working again ASAP.
To Conclude
In most cases, there shouldn’t be any need to reset the controller after a power outage. You can reset the clock without having to reset the whole device. But if you think that the device is malfunctioning then you can use the controller in flashing mode and then press UP to get the SOS option to display on your controller to reset the device.