6 Solutions For Hatch Restore Won’t Turn On

Hatch Restore Won't Turn On
Hatch Restore Won’t Turn On

Hatch Restore is arguably the best sunrise alarm clock on the market, and other units like Casper Glow don’t even come close to the value offered by this unit.

So, if you’re looking for a unit that will serve you better when it comes to sticking to your morning routine, then Hatch Restore is for you.

While there is no debate that you will have to spend a decent chunk of cash on these systems, the performance is just out of this world.

So, you will be sorted out with the ideal performance and won’t feel the need to switch to any other option.

The best thing about the Hatch Restore is its simple configurations. You will not have to go through any extensive setup routines to make use of this system, and it will serve you perfectly in the long run.

So, be sure to stick with the Hatch Restore unit.

While there are some complaints of Hatch Restore not turning on here and there, the majority of the market has been pretty happy with their purchase.

Most of the issues with the system are pretty easy to fix, and you will not have as much hassle with the system. 

Hatch Restore Won’t Turn On

On top of that, the issues with Hatch Restore not turning on are usually not that hard to fix. These problems are either related to broken cables or insufficient power supply from the outlet.

So, you’ll be able to fix the Hatch Restore unit by following some of these solutions.

  1. Re-plug Power Connections

The most common fix to this situation is to re-plug the power connection and then try turning on the Hatch Restore unit.

Most of the time, it is just a minor bug, and there is nothing wrong with your device or the voltage output from the source.

plugged in

So, you need to re-plug the power connections and then proceed with the use of action buttons. Ideally, Hatch Restore will respond to your input, and you won’t have to waste more time in the troubleshooting process.

Nine times out of ten, the issue is with the power connections, and you need to make sure that there is sufficient power going into the system.

The use of a multimeter will help you further address the problem, and avoiding the situation will be fairly easy. 

However, if you’re still stuck in the same error and can’t seem to find your way through a fix, then be sure to refresh the power connections.

Hopefully, you will be able to get through these errors in no time, and fixing the unit will be fairly simple. 

  1. Check For Outlet Issues

If you’re not getting any response even after power cycling the device once, you need to check the outlet for possible issues. This is especially true if you didn’t get the power connections serviced in a couple of months. 

There is a good chance that the outlet is not providing your Hatch Restore unit with sufficient power, and going with a different outlet will be enough to address this situation.

So, simply get the outlet check by a professional, and he will help you fix the electrical connections.

If you’re somewhat experienced with power connections, then it is not a bad idea to check the connections yourself with a multimeter.

However, it is always safer to seek help from a professional, and you shouldn’t try saving money on maintenance fees.

Otherwise, you will just put yourself at risk, and you should never try to fix the wiring connections yourself. There are just too many reports on owners electrocuting themselves while trying to set up the power connections. 

So, to avoid becoming a part of this statistic, the only thing that you can do is to reach out to the dealer. From there, just explain your end and have the dealer take charge of the situation.

He will be more than happy to help you out when you’re stuck in these errors. 

  1. Make Sure The Cord Is Not Damaged

Sometimes, it is the cord that is damaged, and the power supply is restricted because of the damaged cord. So, you need to thoroughly inspect the power cord for possible issues. There is no point in keeping a damaged cord.

Furthermore, you should also check the power adapter for possible issues. If either the adapter for the power cord is damaged, try contacting the dealer for an immediate replacement.

Helpfully, that will be enough to secure a consistent power supply to your device, and Hatch Restore will turn on.

  1. Try Resetting Hatch Restore

no response

If you’re not securing any response from the unit but are sure that the unit is powered up, then resetting the device should be your only move.

It will wipe all confirmations, and you’ll have to connect the unit to your mobile device one more time.

So, just reset the device and then boot it up one more time to pair it with the home network. If the unit is indeed dealing with defective programming, then you’ll be able to secure a response from your smart device.

The only downside to the reset cycle is that you will end up losing all of the configurations. You will have to set up the unit one more time, and fixing the device will be fairly challenging without the reset.

So, be sure to reset the Hatch Restore and then check up on the unit again.

Ideally, you will be able to get ahead of the issue in no time if the issue is related to the programming side of things. However, if you’re still damaged, then you have to check up on the port next. There might be issues on that end. 

  1. Check For Damaged Port

A damaged port is another reason that you would consider when Hatch Restore won’t turn on. Usually, minor obstructions or loose connections can play a role in this situation.

However, if you’re sure that the port is indeed damaged, then getting a replacement is the only move. 


There is no point in using a damaged device, and the unit won’t turn on until the power supply is managed optimally. So, just check for a damaged port and then try turning on Hatch Restore one more time.

Some owners also mentioned that they had to blast the port with compressed air. Sometimes gunk and debris can clog up the port, and you will have to clean up the port to get a reasonable response from the system.

So, if you’re also stuck in the same situation, we suggest that you use compressed air.

This method is pretty effective and will not take much of your time. Just be sure to first remove all power from the Hatch Restore and take it outside.

Otherwise, you will be spending hours trying to get the dust out of the room, and it will get everywhere. 

So, be sure to take the system out in the open air and then blast it with compressed air. Hopefully, you will be sorted out at this stage and won’t have to bother with the same complications. 

  1. Get Help From The Dealer

Getting help from the dealer is not a bad choice when you’ve exhausted all of these troubleshooting steps. The warranty policy on Hatch Restore is not bad at all, and you’ll enjoy amazing support from the Hatch dealer.

So, in case of hardware issues, your first step should be to contact the customer support experts. They will help narrow down the actual problem, and if the unit is indeed defective, then you can demand a replacement.


Overall, it shouldn’t be that difficult to get the unit working again after changing the power source and power cycling the device. However, if you’re not successful after all of these solutions, then contacting the dealer is the only reasonable choice.

Wrapping Up

Can’t seem to get ahead of the situation with the Hatch Restore not turning on?

Try following some of the steps listed in this basic troubleshooting guide, and you will be able to fix these errors in no time.All it takes is a bit of effort on your end, and you will maintain complete control of the situation.

As long as you’re sure that the ports are in good shape and the device is not damaged, fixing is not that hard. You will just have to spend a bit of time managing the power flow to the system, and that will be enough to have you sorted out.

However, if you’re still stuck in the same issue after going through the fixes here, then you need to get help from the official support team. All that you have to do is to explain your end, and they will be more than happy to help you out. 

There is a good chance that you’re dealing with a flawed system, and you’ll just have to claim the warranty. The good thing with these established brands is that you will get complete purchase security.

So, you won’t have to deal with any extensive errors when setting up the system. 

Leave a Comment