Eufy RoboVac is a smart vacuum cleaner that helps you conveniently clean your house. All you have to do is to leave this device on the floor and turn it on. The device will fully clean the house, while you do whatever’s important.
Thanks to RoboVac 11, cleaning your house is only a click away. Whether’s there dust under tables, or chairs, the device is designed to go under and clean everything for you. It will clean off the dust from every nook and cranny. An infrared sensor is pre-installed in the device to help it avoid obstacles while cleaning.
How To Fix Eufy RoboVac 11 Error?
Users who own RoboVac 11 have been experiencing a weird issue where the device suddenly shows a red indicator. The device also beeps for 4 times. Many users are worried about what’s wrong with their device. They have no idea on what they should do in order to get rid of this issue.
Why Does This Issue Occur?
According to the user guide of RoboVac 11, a red indicator coupled with 4 beeps usually mean that the rolling brush is stuck in the device. But, it does not tell much on what they should do in this case.
This is why today’ we will be mentioning a list of ways on how you can fix this issue. So, without wasting any time further, let’s get started!
- Something Might Be Stuck on the Front Bumper
Although it is a pretty useful device, it is still not perfect. While cleaning sometimes, the device may catch something on the front bumper. Once it does, you start hearing four beeps. The four beeps are to notify you whether something is interfering with the front bumper.
Try smacking the front bumper (Not too hard). This will dislodge whatever the device may have caught.
- Manually Clean Your Device
Another thing you may want to do is to completely open your device and clean it. Also, try oiling the motors. Ensure that you are thorough while cleaning. If you find any obstacle, remove it.
Clean out all the dust and hairs. Make sure that you are careful and don’t damage the sensor or board of the device.
- Replace Battery
If you are specifically seeing this issue while charging the device, and the previous two steps haven’t fixed your issue, then you may want to replace your batteries.
You will have to order new batteries and replace them with the old one. This should most likely fix your issue. If it does not, then chances are that your device is probably broken.
The Bottom Line
Through this article, we have mentioned 3 different ways on how you can fix eufy RoboVac 11 error. In order to fix the issue, we highly suggest you follow the instructions mentioned above.