Echo Spot might not be a popular unit in the market, but its compact size and elegant design have pleased many customers. Amazon went all out with the features on Echo Spot, and it rarely runs into issues if you keep the device in good shape. It is true that you’ll run into minor bugs here and there, but overall, customers have had a decent experience with this compact unit from Amazon.
The Echo Spot White Screen issue is one of the more common situations that people have to deal with. This problem is not that severe and can often be fixed by following some basic steps. So, here are some solutions for Echo Spot white screen.
What’s With The Echo Spot White Screen?
- Check the Power Adapter & Voltage
The issue with the Echo Spot White screen is mostly related to a faulty adapter that is not working perfectly with the device. Most of the time, the power adapter will just be damaged, and you can fix this issue by replacing the adapter. However, if the wires are not kinked and the adapter is in good shape, then the possibility of voltage-related issues increases.
It would be best if you could check the power output from the outlet by using a multimeter. There is a chance that the power output is not optimal, and you need to rely on a different outlet to power up your Echo Spot device.
- Restart Your Echo Spot Device
Restarting the Echo Spot device also has a decent shot at fixing your situation with Echo Spot white screen. Usually, these types of glitches are pretty minor and can be fixed by cycling power through the system. So, just turn off the power to your device for a few moments and turn it back on. It won’t take much of your time, and the issue with your Echo Spot will be fixed.
- Update Software to the Latest Version
If the issue is pretty consistent and keeps presenting itself after the cycling power through the system, then you should check the software version. If you’ve not updated the software for a while, then updating Echo Spot might just fix this situation for you. However, you should thoroughly check the device for possible hardware issues. When you’re sure that the device is in good shape and not damaged in any dimension, then go through with the software update.
- Check The Condition Of the Power Port
Even if the voltage is working perfectly and the power adapter is in good condition, you will struggle with the system performance because of a defective power port. This issue might not be as common, but the possibility exists that you’re struggling with power issues because of a faulty port.
So, you should remove the adapter from your Echo spot unit and check the condition of the port. Using an air blower to clean out the port is a good method of eliminating power-related issues in the system. On the other hand, if the port is damaged, then calling customer support is your best bet.
- Reset the Echo Spot Device
Resetting the Echo Spot is not a smart decision when you’re trying to eliminate programming-related issues. However, it becomes necessary if you’re unable to get the device working even after testing out all the methods above. Just keep in mind that resetting the device will remove all of the configurations from your unit, and you will have to go through the setup from the start.
It can take quite a bit of your time, but there is a good possibility that you’ll fix all the programming-related issues after trying out this method. So, reset the Echo Spot Device if it is not working after updating the software and eliminating power-related issues.
- Claim Warranty
The last thing left to do is to claim a warranty if the reset procedure has no impact on the situation of your Echo Spot. There is likely something wrong with the screen, and you can’t do anything yourself to fix the unit. In this situation, the only method is to call the dealer or the Amazon support department about this issue and demand a replacement. If your claim is valid, Amazon will provide you with a replacement in no time.