LG has one of the best smart fridges that you can buy from the market. Along with the ice and water dispenser, there are a lot of features that are offered by LG smart fridges. Depending upon which model you’re buying, you can just knock on the display to see inside the fridge compartment. LG smart fridges have a spacious interior and you won’t have to worry about running out of space to put food items.
All in all, LG smart fridges are very reliable but sometimes users can run into issues. This is why we will be going over some of the common LG smart fridge problems and how you should go about solving them.
Common LG Smart Fridge Problems Troubleshooting
- Frost in Freezer
A few customers have mentioned issues with the Frost building in the freezer compartment of the LG smart fridge. Usually, this issue happens when you’ve set the temperature too low on your freezer due to which frost starts building up in your Freezer. Other factors can also cause users to run into this problem. The good thing is that you can get this problem fixed by following the instructions mentioned below.
After configuring the temperature of the freezer compartment to the optimal level, you need to check if there is any damage to the rubber seals installed in your door. If you detect any physical damage or an area that is compressed and doesn’t seal the freezer properly, then you need to immediately change the seals to deal with the frost issue. You will also need to check the air vents in your smart fridge to see if anything is blocking the airflow.
You also need to avoid putting hot food items into the freezer and reduce the number of times you open the freezer as that can also create frosting issues. If the freezer is already frosted then you need to leave the door open for a few hours to remove the frost. Also, remove the excess water from the freezer when you’re defrosting the compartment.
- Dispenser Problems
Users have also complained about a few issues with their water dispenser where the water won’t come from the dispenser or the water pressure will be too low. Proper care and maintenance are required by the water dispenser for it to function properly. If you’ve not followed any of the maintenance steps in the manual then it is likely why you’re unable to get water from your dispenser.
Depending upon a few factors like the water capacity and the quality of water coming from the valve it is recommended by LG that you change your water filter after every few months. Changing the water filter will fix the water pressure and your dispenser should start working properly. The water filter can get clogged if users don’t replace it for a long time. That can create issues like low water pressure for your dispenser.
Along with the water filter, you will have to check the valves to see if it is turned on properly. Make sure that your water line is not damaged and then try using the dispenser again. It should start working and if you don’t have a filter on hand then you can use the bypass filter to see if that improves the water flow. If it does then you will have to buy a new filter to replace the bypass cartridge.
- Not Enough Cooling
Some users also stated that sometimes their fridge won’t cool the food properly. There are a few things that you will need to check to fix the cooling problem. Start by making sure that the fridge has proper access to power and the energy output is optimal. Next, you can configure the temperature control to set your fridge temperature to a lower level. That should help you personalize the temperature in your fridge and hopefully, you won’t run into the same issue again.
Along with the power supply make sure not to overstuff your fridge with food items. Even though LG fridges are quite spacious if you don’t manage that space properly then it will cause cooling issues for you. So, arrange your food items in a way that they don’t block the cooling vents and your food can be preserved for a longer period.