5 Reasons Why Your Black And Decker Iron Is Not Heating Up

black and decker iron not heating up
black and decker iron not heating up

An iron press is one of the most important appliances that you will find inside any household. It works on the basic principle of heating up through which you can press different pieces of cloth. However, what happens when your iron press does not heat up at all?

Regarding this, we have been hearing complaints from users about their Black and Decker iron not heating up. So, in case you are also someone who is facing a similar issue, then here is how you can fix it with ease:

How to Fix Black And Decker Iron Not Heating Up?

  1. Checking the Soleplate

If you notice your iron press suddenly acting up, then the first thing that you should check is its soleplate. Over time, limescale deposits can develop on this plate which can cause issues with the iron’s ability to heat.

As these deposits can get all clogged up on the iron plate, you won’t be able to get any steam or heat. To fix this, you will first have to switch off the iron press and let it cool down for a while. Once it’s cooled, you can then try wiping the soleplate using any cold/damp piece of cloth. To ensure that it gets cleaned, you can use dip the cloth in a bit of vinegar.

  1. Incorrect Settings

Although this may sound really simple, it is possible that you might have the wrong settings on your iron press. These iron presses are known to come with a number of settings, which is why you will have to inspect which one you’ve set yours too.

To adjust the settings, you will have to turn the knob that is found on the top of the iron press. Keep in mind that depending on the piece of cloth that you are about to press, you may have to use different settings. If you are having a hard time choosing the right setting, you can refer to the user manual.

  1. Issues With The Plug

Any possible issue with the plug can also cause all sorts of issues with your appliance. Though if that really is the case, then you will first have to inspect the switch where you have plugged it into.

If you are getting a power surge or low voltage, there’s a good chance that it could be causing your iron to not function the way it’s supposed to. However, you should be able to resolve this by calling in an electrician and letting him have a better look at what could have gone wrong.

  1. Inspecting the Water Reservoir

Most iron presses also include a water reservoir that often needs to be filled in order to let out steam while pressing. Even though having an empty water reservoir should still heat the iron press to some extent, there’s a possibility that it may heat up to the desired level.

In such cases, all you need to do is to make sure that you fill the water reservoir. Do make sure that you first turn off the iron press, and let it cool for a while before attempting to fill it with water.

  1. Getting it Checked

If you still hadn’t had any luck in getting your iron press to work, then it could be that you are dealing with some sort of a faulty component. If that is so, then you will have to get the whole device checked by a local repair shop.

Alternatively, you could also get in touch with the support team and ask them for advice on what you should do next.

The Bottom Line:

Is Black and Decker iron not heating up? Although there are plenty of known reasons why this could happen, it isn’t related to a technical issue, at least most of the time. In either case, you will have to inspect the iron press for anything out of the ordinary. If you aren’t aware of how you’re supposed to do this, then simply read through the article above.

Leave a Comment