If you’re trying to stick with a more affordable range while still enjoying decent suction power from your cleaning robot, then Wyze might just be the perfect brand for you. This brand maintains a decent reputation in both the security unit market and the cleaning device market. So, you won’t have to worry about dealer support or any complications regarding the warranty claim.
However, you might still run into some minor bugs, like the Wyze vacuum not cleaning the whole room from time to time. Usually, this issue is pretty standard and not that hard to fix. So, you can follow some of these troubleshooting methods to get an ideal response from the vacuum.
How to Fix Wyze Vacuum Not Cleaning Whole Room?
- Check For Obstacles
Checking for obstacles should be your first move when the Wyze Vacuum is not cleaning the whole room. The area missed by your robot might just be isolated, and there is a good chance that nothing is wrong with the robot itself. So, keep that in mind when the Wyze vacuum is not cleaning the whole room. You will simply need to get rid of the obstacles, and that would be it when it comes to performance issues.
- Reset The Cleaning Cycle
Sometimes, it is just a minor bug, and there are no serious issues with the device itself. So, you should try resetting the cleaning cycle and then check the response from your robot. Ideally, placing the unit on the charging station and then engaging the cleaning cycle should be enough to isolate the issue. Hopefully, the robot will clean the whole room this time around.
- Check The Charging Status
The battery life on this unit is not that great when compared with other brands on the market. You will struggle with the system performance if the room is too large, as the robot will just die down in the middle of the cleaning cycle. So, you should try to divide up the sections and then make sure that the robot is fully charged before engaging in the cleaning cycle.
It can take a few hours for the unit to charge properly, and there is no point in speeding through this process. So, simply check the charging status on your device and then leave it on the base station for a few hours.
- Clean Up The Base
At this stage, you should try to narrow down the issue to clogged hair and debris beneath the robot. So, flip over the unit and thoroughly clean the base as well as the wheels. Make sure that there is no clogged hair or debris clogging up the system, and that would be it when it comes to the Wyze unit not cleaning the whole room.
- Try Power Cycling The Unit
There is no harm in reinserting the battery to further isolate the issue. This will power cycle the device and help eliminate minor bugs from the system. So, instead of resetting the device immediately, try removing the battery for a few minutes and then inserting it again properly. Hopefully, you won’t have to go through more troubleshooting methods after this point.
- It’s Time For A Factory Reset
On the other hand, if there is still no response from the unit, then it is time for a quick reset. This will wipe away all the maps and stored configurations. You will have to spend hours trying to reconfigure the maps, but there are no other options left at this point. So, go through with a factory reset and then check the response from the main device. Once everything is set up, the Wyze vacuum should clean the entire room.
- Get Help From Official SupportÂ
Seeking help from official support is never a bad option, as they can help you narrow down the exact cause of this issue pretty quickly. So, if you’re still unable to find the main problem with the Wyze unit, just ring up the official support line. They will ask you for some details and then guide you accordingly on hardware-related issues with the Wyze unit. Hopefully, you won’t have to claim the warranty, and the Wyze system will start working perfectly in no time.