The Tuya smart system is known for its affordability and better value when compared with some of the premium options in the market. It brings a ton of utility to your smart setup, and you can personalize all your smart devices with a few configurations. However, it will take a bit of time to get used to the new settings. So, make sure to experiment with different rules and test out the smart system to have more control over your devices.
With that said, quite a few users have asked about Tuya-Convert Not working. If you’re also struggling with a similar problem and Tuya-Convert won’t work, then the following solutions should help you around the issue.
Fixing Tuya Convert Not Working
- Check Firmware
The primary reason why you’re struggling to get the Tuya-Convert working on the system is the updated firmware from Tuya smart. The newer units from this brand are not compatible with the Tuya-Convert, and you won’t be able to flash them as long as they are on the updated firmware. So, you’ll either need to replace the device for older units or get the older firmware installed on your device.
If you have a new unit recently, then it is not recommended to mess with the firmware and try to replace the device. Otherwise, you will be spending hours in the process with a small probability of success. There have been a lot of reports of users running into this problem after purchasing new devices. So, you should access the online forums and avoid units that bring updated firmware to your setup.
Other than the compatibility issues with the firmware, there are not many issues that can lead to Tuya-Convert not working. So, you just have to make sure that the firmware on your units is compatible with Tuya-Covert before making the purchase. Hopefully, you will be able to save some money and a lot of headaches.
- Check Logs
If you’re sure that you’re working with compatible firmware, then you are probably making a mistake during the flashing process. Going through the log files will help you isolate the problem, and it is relatively easy to get ahead of the problem after you’ve narrowed down the issue. So, make sure to go through the logs if you’re not getting the desired performance from the Tuya-Convert.
To fix the issue, you will have to wipe your progress and start from scratch. Make sure to follow each step mentioned in the guide and then go through the flashing process again. As long as you’re using an updated guide, it shouldn’t be too difficult to get ahead of this problem. So, just go through the logs to isolate the step that you missed.
Make sure to go through some forums to get the updated guides on flashing devices with Tuya-Convert. Minimal changes in the flashing process can create problems for the users. So, if your Tuya-Convert is not working, there is a good chance you’ve skipped a step in the process.
- Use Forums
If you’re unable to isolate the problem yourself and the issue remains in your smart system, then uploading the log files on the online discussion forums should help you get ahead of the issue. There are many experts active on these forums that will help you narrow down on the issue while also recommending some possible troubleshooting steps to get the system working again. So, instead of spending hours in the process, make sure to reach out to some experts.
Make sure to provide complete information on the firmware of your smart device as well as its model to give users a better perspective on your issue. That way, you will get better suggestions, and there is a good chance your issue will be fixed within no time. Otherwise, you might need to switch to another device or OS for Tuya-Convert to work again.
All in all, these are a few things that you can do if the Tuya-Convert is not working. Most of the time, these issues are related to the firmware, but some users did say that switching the OS helped them troubleshoot the error. So, you should try a similar process if the issue remains after going through the guide again.