For those of you who love to have a comforting experience inside the bedroom, Somfy offers motorized blinds that can be automated at will. Still, it is quite common to experience issues with these blinds, especially when it’s the first time you are using them.
Regarding this, there have been plenty of queries about the Somfy battery blinds not working. This is why today; we will be taking a look at all the possible ways through which you can troubleshoot the issue.
So, without wasting any time further, let’s get right into it!
Somfy Battery Blinds Not Working
- Checking the Power Source
If you are not getting any response out of the blinds, then there’s a good chance that you are experiencing issues with the power source. As a result, we recommend that you inspect the batteries along with the connection of the blinds.
Ensure that your blinds are getting the power required to operate. If not, then you may have to get replacement batteries or repair the connection. Though before you do anything, make sure that you thoroughly test out the blinds.
- Power Cycling the Blinds
Another thing that you can do to quickly troubleshoot your blinds is to make them go through a power cycle. In case you don’t know what a power cycle is, all you need to do is to keep the blinds unplugged from any power source for a couple of seconds.
Ideally, we suggest that you keep them turned off for around 30-60 seconds. Once you are done, you can try turning them back on after which they should go back to their working state. Although this isn’t a full reset, power cycling can still help troubleshoot most such issues.
- Resetting the Motor
In case power cycling didn’t help, you can also try resetting the motor. However, you will first have to check if there is any mechanical push-button limit. If there is, you will have to press the button to reset it.
After successfully resetting the blinds, you may have to go through a few configurations again as it is known to wipe out any stored settings that you may have saved.
- Troubleshoot the Remote
You can also try troubleshooting the blinds through your Somfy remote. There should be a button right in the middle of the remote, labeled as “My”. Simply press down the button for around 10-15 seconds after which you should start seeing a flashing light.
Do keep in mind that your remote should have charged batteries inside before you can attempt this. If you aren’t getting any lights on the remote, it could be that your batteries need a replacement.
- Seeking Professional Help
If you still haven’t been able to get your problem fixed, then it would probably be better if you seek help from a verified professional. You can try calling in a professional technician who should be able to have a good look at your blinds.
Similarly, he should be able to identify the reason why they aren’t working along with how they can be repaired.
- Faulty Blinds
At this point, it is safe to assume that you might have faulty blinds that are beyond repair. In such cases, the only thing that you can do is to get a full replacement unit. If your products are still under warranty, then you should be able to get a replacement without any added cost. Else, you might have to spend a few dollars.
The Bottom Line:
Annoyed with your Somfy battery blinds not working? This typically happens when there is a problem with the power source. However, there are certain other things that you will need to check as well. To learn exactly how you can go through each troubleshooting step, we strongly advise following the instructions that we have listed in the article.
So, be sure to refer to the details that have been mentioned above!