Utilizing Nixplay Cloud Frames is the least complicated method for interacting with your photographs. You may effortlessly send pictures from the frame to the home of a loved one using the Nixplay Mobile App, which is available for both the iPhone and Android operating systems. It is necessary to have a WiFi connection in order to see any images that have been emailed to you from any location around the globe. You have a lot of options to choose from while using Nixplay. Is there any way to solve a problem with your Nixplay motion sensor?
Nixplay Motion Sensor Not WorkingÂ
You may find the solution to your question in this article.
- Steer Clear Your Frame
A timer that is set in the Motion Sensor will only function properly if there is no motion around the frame for the whole period of time that the timer is set to. On rare occasions, your frame may not turn off properly. This is conceivable. It is well knowing that this is caused by heating and cooling systems that are located nearby. The infrared sensor that is already integrated into the frame is searching for deviations in the infrared radiation that are brought on by motion. Due to the sensor’s sensitivity to fluctuations in temperature, air conditioners would be seen as belonging to the category of goods with movement or activity.
As a result of this, you should steer clear of situating your frame next to heat-generating equipment such as air conditioners.
- Activate the Hu-Motion Sensor and Sleep functions
After logging in to www.nixplay.com, go to the ‘Frames’ section to choose your desired frame. Look under the Settings menu for the Sleep Schedule and the Motion Sensor. Turning the on/off switch will either activate the function or deactivate it, depending on your preference. You have the ability to use the Sleep Schedule to define a specific time for when your frame enters standby mode and when it turns back on after being in standby mode. When the Sleep Schedule function is activated, the Hu-Motion Sensor is put into an inactive state.
The Activity Sensor will put your frame to sleep if it doesn’t detect any human activity for a certain amount of time, and it will wake up again if it does.
Don’t forget to click the “Save These Settings” button after you’ve finished making your choices.
What to Do If Nixplay Frame Is Stuck On Loading
If you’re using Nixplay WiFi Frames, you may try turning off the WiFi frame and then turning it back on again. If this resolves the problem, make sure the software on your frame is always up to date.
If restarting the frame does not solve the problem, you may need to do a factory reset on it. The following are the steps that need to be taken in order for you to start again. There should be a blue progress metre shown on the screen of the frame. In the event that this does not work, please get in touch with our Customer Service department.
- Photo Frames manufactured by NIX that do not rely on WiFi connectivity.
- Remove the memory card from your NIX frame and the USB thumb drive that you have inserted into it. Whether this resolves the problem, check to see if the firmware on your frame has been brought up to date.
How to Use the ON/OFF Function on Your Nixplay?
When using the Auto ON/OFF feature, you may set a specific time for the frame to turn on or off.
Using your remote control, go to “Settings.” Then, scroll down to “Auto Power.”
- If you want the frame to turn on at 9:00 in the morning, you need to change the setting for “Auto On” to “09:00 ON.” To enable access to this function, move the word “on” to the position immediately to the right of the time.
- To turn off your frame at 19:00, you must ensure that the “Auto OFF” setting is turned on. Replace the word “on” that is to the right of the time with the word “off.”
- Don’t forget to adjust the time on the frame to correspond with the time zone in which you are now situated.
How do the Sleep function and Motion Sensor work together? Does one cancel out the other?