Lockly is a smart lock that allows you to control access to your home using your smartphone. You can use Lockly to unlock your door, set alarms, and view live footage of who is at your door.
Are you also asking yourself why my Lockly alarm not showing numbers?
There are a few reasons your Lockly alarm might not show numbers:
- Make sure that the batteries are properly installed and charged. If the batteries are dead, the alarm will not work.
- Check to see if the alarm is turned on. If it is not, the display will not show anything.
- If you have recently changed the code for your Lockly, the new code may not be entered correctly.
If Lockly is still not showing numbers, it is advisable to contact Lockly customer service for assistance.
If you’re having trouble seeing the numbers on your Lockly alarm, there are a few things you can do to troubleshoot the issue.
Lockly Not Showing Numbers Fix:
- Change Faulty Batteries
Begin with inspecting if the batteries are properly installed and charged. If the batteries are dead, the alarm will not work. Lockly recommends using high-quality alkaline batteries for the best results. Double Check to ensure the batteries are correctly installed and have enough power. If the batteries are low, it may affect the display.
- Turn On The Alarm
Second, check to see if the alarm is turned on. If it is not, the display will not show anything. You can find the switch for the alarm on the back of the Lockly unit. Make sure that the switch is in the “on” position. Double-check to confirm if the alarm is turned on. If it is not, the display will not show anything. To turn on the alarm, press and hold the power button for three seconds. The power button can be located at the back of the Lockly unit. Check to see if the alarm is turned on. The display, including the numbers, will not show anything if it is not.
- Turn Display On
If the alarm is turned on but the display is still not showing anything, you may need to turn on the display. The display is turned off by default to conserve battery power. To turn on the display, press and hold the power button for three seconds. The power button can be found at the backside of the Lockly unit. If the display is turned off, you won’t be able to see the numbers. Check to make sure that the alarm is turned on. It’s also possible that the display is turned off. Press and hold the “Display” button to turn it on for three seconds.
- Re-enter Code
If you’ve recently changed the code for your Lockly, make sure that the new code is entered correctly. To check, press the “Lock” button and enter the new code. If you have recently changed the code for your Lockly, ensure that the new code is entered correctly. Sometimes, an incorrect code can cause the display to malfunction.
- Switch Off Device and Restart
If all the solutions mentioned above have been tried and you’re still having trouble, try restarting your Lockly. To restart, press and keep holding the power button for three seconds. The power button is located on the back of the Lockly unit. This will turn off your Lockly once it’s turned off; press and hold the button for three seconds or even longer until the device restarts. When the system is switched off, wait a minute, and press the “On” button to turn it back on. Chances are that the issue would get fixed by now.
To Sum it up:
If your Lockly alarm is still not working, you can try a few things. First, check the batteries to ensure they are installed properly and charged. If the batteries are dead, the alarm will not work. Second, check to see if the alarm is turned on. If it is not, the display will not show anything. Finally, if you recently changed the hourly code, the new code may not be entered correctly. If the issue remains, please get in touch with Lockly customer service. The company will guide you better with what steps to take next.