One of the most frustrating things to deal with is having to type in the correct code and still getting an error whenever you are accessing a keypad. Though there can be many reasons why this may happen, we will be taking a deeper look at the complaints of some users who were unhappy about their Linear gate keypad.
According to these users, the Linear Gate keypad is not working at all due to which they can’t really access their main gate. In order to learn how you can get rid of this annoying issue, here is everything that you should know about it:
Fixing Linear Gate Keypad Not Working
- Checking the Batteries
If you’re keypad is not giving any kind of response, then the first thing that you should check are the batteries itself. Chances are that if you haven’t replaced the batteries for quite some time now, then they could have been acting up.
Though if that is the case, then you should get by simply replacing these batteries. All you need to do is to open the battery cover found on the face of your keypad.
- Inspecting the Keypad
Although this may be quite rare, but it is possible that you could have a bit of damage on the keypad due to which it is struggling to function. However, before you reach to any conclusion, you will have to manually inspect the keypad and look for any signs of damage.
It is also important to mention that most keypads can often act up if there is a bit of contaminants such as salt or even sand inside. Unfortunately, in case of damage, you will have to apply repair/replacement.
- Power Supply Issue
It is also possible that the keypad is not getting any kind of power because of which it is not giving any response when you type in your code. If the keypad really has lost its power, then you should definitely check the control panel and inspect the switches. It could be that any of the switches is turned to OFF.
If you do notice that, then you will simply have to turn it back on, which should be able to get power back to your keypad. Oftentimes, power surges may be the reason why these may lose power all of a sudden.
- Possible Obstruction
In case you have installed any sort of sensors on your gate, there’s a possibility that there is some kind of obstruction that may have been causing the issue. Objects like branches or debris can be some of the most common things that can block your path.
In the same way, it is also possible that you are simply dealing with a dirty sensor. If that is so, then you should be able to easily get by after giving the sensors a good clean. Just in case, we also recommend that you give the wires a good look as well.
- Seeking Professional Help
If you are still unable to get your keypad to work, then there’s a good chance that you may be facing a more technical issue. In such cases, it is strongly advised that you try and seek professional help instead. You can either call in a technician and have him take a look at your keypad or try to contact the support team.
Either way, you should have a lot better chances of getting rid of the issue if you get help from any of them as they should be well equipped for troubleshooting these issues.
The Bottom Line
Linear Gate keypad not working at all? At times, there can be issues with your device’s battery which can ultimately cause the keypad to not turn on. Similarly, other reasons that may cause your keypad to not function are issues with the power source as well as any possible damage to the keypad itself.
Though if you are dealing with any of these, then you should be able to find instructions on the troubleshooting process above.