Gosund switches are considered to be one of the best switches available in the market.
However, like many light switches, the Gosund light switch also comes with its problems. So, you will have to go through a few basic fixes here and there to get a good enough response out of the system.Â
Most of the time, you can limit the majority of issues by having a stable router connection and limiting issues with installation.
So, be sure to have the light switch installed by an expert while also working with a decent router. That will save you a ton of hassle down the road.
With that said, having the knowledge of the basic fixes will help you avoid a ton of issues with the system.
It all comes down to how you’re planning on optimizing your smart setup, and spending a bit of time learning how to fix minor bugs might pay dividends down the road.
If you are facing problems such as the Gosund light switch not working after changing, then we are here to help you solve your problem.
Let us have a look at all the possible reasons for such a problem, along with their solutions.
Fixing Gosund Light Switch Not Working After Changing
- Check The Connection.
The first thing you need to do when the Gosund light switch is not working after changing is to check the connections.
It is possible that the wires are not installed properly. The loose wire may also lead to many other problems. Therefore, it needs to be fixed as soon as possible.
Remove the light switch from the switch’s socket. Next, tighten the wires properly with the light switch.
Lastly, put the light switch back into the socket and screw it tight. In this way, your wires will not be loose.
It is also possible that the outlet you are using to connect your light switch does not work anymore.
In such cases, the light switch will not receive power which will not work. You can easily check the power of the outlet by using a voltmeter.
- The Light Switch Needs To Be Reset.
One of the most crucial things Gosund light switch users do not know is that you need to reset the light switch after changing it. After wiring the Gosund light switch, a green indicator starts flashing.
It is suggested to press the light switch for about 5 seconds until the indicator starts flashing rapidly in Wi-Fi conditions.Â
The rapid green light flashing of the indicator shows that the light switch is in easy mode. The light switch has two connection modes. In case the easy mode does not work for you, you can always switch to the AP mode.
- Check Wi-Fi
It should be kept in mind that the Gosund smart light switch works efficiently at the 2.4GHz frequency of the Wi-Fi.
Therefore, it is recommended to ensure that the Wi-Fi frequency you are using is according to the requirement.Â
In case the Wi-Fi frequency is 5GHz, then it can be easily changed to 2.4GHz by following the manual provided along the router.
- Circuit Breaker Tripped.
It is also possible that the circuit breaker tripped during the replacement of your smart light switch.
It is common for the breaker to trip as it is responsible for keeping your house safe and protecting it from dangerous electrical problems.
Such problems can be easily solved by flipping the breaker to the ON position.
Once the breaker is turned on again, check your light switch by turning it on. If the breaker trips again, it means that the switch’s wiring is not properly installed.
- Check For Hardware Issues
At this point, you should just call it a day and check the unit for hardware issues.
There is a chance that the unit is damaged, and you need to reach out to the official support team for help here. They will take a peek at the situation and then guide you on how to address these errors.Â
All that you have to do is to explain your end and then forward a warranty claim.
The dealer will start the verification on his end, and there is nothing that you can do to fix a damaged piece. Hardware issues are by far the hardest thing to fix on your own, and you shouldn’t waste any more of your time.
The upside here is that the warranty status associated with most of the Gosund units is beyond phenomenal.
You will be able to reach out to the official support team for help on these issues, and these experts will make your life much easier.
All that you have to do is to explain your end, and the dealer will take charge of the situation.
From there, getting a new unit and replacing the current one will not be that hard of a job for you. So, be sure to check up on the hardware side of things when you’re stuck in these errors.Â
- There Might Be Issues With The Light
Similarly, the issue might not be with your light switch, and it might be the light itself that is to blame here.
So, instead of only looking at the light switch, you need to expand your inspection and take a peek at the lighting itself.
Most of the time, it will take you less than five minutes to inspect the light bulb.
From there, you can either choose to replace the lights or try out a different power source to check for performance errors. If the light is indeed defective, then installing a new one will have you sorted.
However, if the light is not to blame here, then it might be time to take a second look at the wiring status.
This time around, we suggest that you hire an expert to help you here. He will cost you a bit, but you’re not left with many options.
Just make sure that the power connection is in good shape and that you don’t mess up the wiring side of things.
#From there, you can also check for water damage or moisture issues to further isolate the situation.
Once you have a good grasp of the situation, asking an expert will help you get the wiring back in perfect shape.
You will not have to waste any more of your time on these issues, and the experts will have you sorted in no time.
So, be sure to keep track of the maintenance and have the power connections serviced once every six months. Hopefully, you will not have to bother with any long-term errors.Â
- Call Gosund
Lastly, if you can’t even isolate the issue to the hardware side of things and the light itself is in good shape, seeking help from the professionals working at Gosund is not a bad idea.
This brand maintains a good reputation, and its customer support team is one of the best.
All that you have to do is to involve these experts in the troubleshooting process, and they will be more than happy to help you through minor complications along the way.
So, be sure to reach out and explain your end.Â
Hopefully, you will not have to worry about replacing the unit, and sending a detailed description of the issue along with snaps of the wiring status will help them get a better grasp of the situation.
From there, they will guide you step by step on a viable solution.Â
Even if they can’t seem to figure out the issue for you, you can demand a fresh piece.
If you’re lucky, it will be pretty easy to grab a new piece within the same week, and you can go about installing that accordingly. Just be sure to get help this time around, and you will be sorted.Â
Wrapping Up
These are the things that you can try when the Gosund light switch stops working after changing.
Most of these solutions are pretty basic, but that is all that you need to address the errors with the device. It will not be that hard of a job to fix the majority of these issues.
Once you’re through with the adjustment, you can start focusing on the hardware side of things to further isolate the problem.
If the hardware is damaged, then you’re out of luck, and you will have to grab a fresh piece from the dealer. There are no other methods here when it comes to fixing issues.
So, instead of wasting hours of your time, be sure to engage the dealer, and he will take charge of the situation.
You will be able to save yourself a lot of time when trying to go through with the adjustment, and the dealer will help you through each step.
If you both come to the conclusion that the unit was indeed defective, then you can demand a replacement by claiming the warranty.
So, be sure to reach out to the dealer, and he will be more than happy to help you with these errors.Â