Buying a smart plug is one of the most effective methods of increasing your control over your appliances. You can manage their functionality easily by connecting the power cord with the smart plug and then using the application to turn the devices on or off. This feature might seem like a simple upgrade, but it will bring much more convenience to your household.
However, recent trouble with Feit smart plug is that they won’t connect to the system. It can be pretty inconvenient when you can’t access the smart devices even though you paid specifically for wireless controls. So, here is what you can do about Feit smart plug not connecting.
Fixing Feit Smart Plug Not Connecting:
- Check LED Indicator
The LED indicator on your Feit smart plug will help you narrow down on the connection issue. When the smart plug is in pairing mode, the LED indicator flashes quickly. The flashing status on the LED indicates that the plug is ready to be connected, and you can use the router credentials to connect the device.
However, if you’re in a situation where the LED indicator is not blinking, then that is likely why you’re unable to get the Feit smart plug to connect. The only fix here is to get the smart plug into pairing mode after reset, and that should fix the connection issue.
- Power Cycle Plug
Sometimes, the fix for Feit smart plug not connecting is as simple as removing the plug from the outlet for 20 seconds and then putting it on again. This would put the smart device in pairing mode, and you will notice that the LED indicator will start blinking after a few seconds. So, before you reset the smart plug, there is no harm in trying your luck with this method. There is a decent possibility that the issue will be fixed at this stage, and you will be able to connect the plug once it is in the pairing mode.
- Fix Channel Bandwidth
The Wi-Fi channel bandwidth has always been the leading problem for owners with a single-band router. If you’re also working with an older router, then there is a chance that your router doesn’t broadcast both 5.0GHz and 2.4GHz channels. In this situation, you need to limit the channel frequency to 2.4GHz as the plug can’t connect with the 5.0GHz router. So, open up the router configurations and change the channel bandwidth from 5.0GHz to 2.4GHz.
- Change Credentials
Even if you’re using a dual-band router, the credentials can sometimes play a role in creating connection issues with the Feit smart plug. If there are any special characters being used in the router name or password, then it is a good idea to change the credentials to simple alphabets and numbers. That will fix the connection issue in most situations.
However, if there is no clear distinction between the names of your 5.0GHz channel and 2.4GHz on your dual-band router, then you need to make sure to use different credentials for each channel. That will make it easier for the smart plugs to connect to the 2.4GHz channel without wasting time with the 5.0GHz channel.
- Remove Proxy
The issue with the Feit smart plug not connecting to the mobile device can also be caused by an active VPN connection. So, if you like using services like Nord, it might be a good idea to temporarily shut down the VPN application and then try connecting the smart plug again. If there are no issues with the smart application, the smart plug should connect to your device at this point.
- Reset The App
The last thing you can do about Feit smart plug not connecting is resetting the smart app. To do this, you need to access the mobile settings and navigate to the installed application configuration. From the list of the applications installed on your phone, you just have to find the smart app and remove all the stored data from the storage options. That will reset the app, and you can try accessing the smart plug through the application again. If the plug was paired correctly, it should start working once the app has reset.