Going with expensive options like the Ring Chime Pro can leave a dent in your budget, but you won’t have to worry about issues like doorbell chime box buzzing. Usually, the tradeoff between price and value is not that bad when you’re going with established brands, and budget options are not always suitable.
So, if you want to avoid issues like the doorbell chime box buzzing, try to go with the Ring chimes. On the other hand, if you’ve already purchased the chime and it won’t stop buzzing, then all hope is not lost.
You can still rely on a few methods to get the chime working again. So, here are some troubleshooting tips to help you along the journey.
What To Do If Your Doorbell Chime Box Is Buzzing
- Check For Loose Screws
Checking for loose screws should be your first move when the doorbell chime is running into this issue. Most of the time, you won’t have to do both with any more steps, and just fixing the mounting section will eliminate this issue with the doorbell chime.
So, all you need to do is to carefully inspect all the different sections and tighten up the mounting screws. Make sure to avoid over-tightening these screws as you will run into the same issues again.
- Fix Power Supply To The Doorbell Chime
Issues with spliced wires or frayed sections will also lead to similar issues with the doorbell chime box buzzing. When popper power is not supplied to the unit, then the doorbell chime won’t work properly, and you will just hear a buzzing sound come from the unit.
So, make sure to check the wiring after fixing the loose screws. If there are any damaged or frayed wiring sections, just replace the wiring. This should be enough to get the unit working again without the same buzzing issues.
- Clean Contact Points
If you’re using a smart doorbell chime, then the issue might be with the dirty connection points. If you’re sure that there are no hardware-related issues, then you need to check the batteries and clean the connection points with sandpaper. This will be enough to fix the buzzing issues, and the unit will start working perfectly with the doorbell.
As long as there are no issues with the power supply and the batteries are fresh, it should be enough to eliminate the buzzing issue. So, make sure to clean up the connection points if the issue is not fixed after tightening up the screws.
- Check For Hardware Issues
Sometimes, you will just be dealing with hardware-related issues where the broken pieces inside the chime will stop the unit from ringing properly. You will simply hear a buzzing sound, and the unit won’t respond perfectly to the input from the doorbell.
Sadly, there isn’t much that you can do about the damaged doorbell and your best move is to claim the warranty. So, reach out to the dealer and have him provide you with a new unit. Otherwise, you will have to spend your money on a new chime.
- Reset Chime To Factory Defaults
Smart chimes can also run into programming-related issues from time to time. So, there is no harm in resetting the smart chime if it is not working at this stage. This will wipe away all the configurations, but you can set up the device again from scratch. Ideally, setting up the new chime won’t take you more than a few minutes. For this reason, you shouldn’t be too concerned about wiping the old configurations and just reset the chime when it is not working.
- Get A New Doorbell Chime
At this stage, your chime should be working perfectly as the majority of issues with the doorbell chime box buzzing are related to power, wiring, or mounting issues. So, there is a decent chance that your doorbell chime will be working perfectly at this stage.
On the other hand, if the chime is not working at this stage, then you’re dealing with a defective control board. There is nothing that you can do about this situation but to buy a replacement. So, look for a compatible unit from Ring or other established brands if you’re still stuck in the same issues.