The ease of installation and the simple design of Illumibowl is the primary reason behind the success of this product. With high-quality suction cups, it will stay in perfect position, and you won’t have to worry about this light falling into the bowl. However, you will still find some customers who had trouble getting the Illumibowl light to work properly.
The majority of these customers were in possession of a faulty product. The following list of common Illumibowl light problems will further improve your perspective on the installation and management of this device. Hopefully, you won’t have to bother with purchasing a replacement, and your current unit will work perfectly.
Common Illumibowl Light Problems
- Illumibowl Not Turning On In Dark
One of the biggest complaints about the Illumibowl light was that it wouldn’t turn on in the dark. There is no point in having a light that won’t respond to motion when you’re trying to use the toilet at night. So, it is pretty frustrating to run into this complication where Illumibowl won’t turn on in the dark.
This issue is mostly related to battery issues, and your battery has likely drained out. Even if your Illumibowl light is fresh, it is a good idea to source batteries and installs them on your device. That will fix the responsiveness issues, and the lights should come on when it’s dark.
- Colors Not Cycling
The colors on the Illumibowl light can be adjusted according to your preferences. However, if the colors are not cycling as you press down on the button on the side of your light, then there might be something wrong with the button. The only thing you can do about this situation is to let the light dry out in a sunny place and then try pressing the button again.
Most often than not, this will fix the lighting issue, and you will have access to the colors again. So, simply let the button dry out and then try cycling through the different colors again.
- Brightness Issues
There have been a ton of complaints about the brightness being too low on the Illumibowl system. Luckily, the button on your Illumibowl light will help you increase or decrease the brightness according to your preferences. All you have to do is to hold down on the button for a few seconds, and the system will present different brightness levels. Just choose the highest brightness level, and that will serve you perfectly.
- Fitting Problems
The fitting can be pretty difficult with Illumibowl, and you’ll have to carefully measure the arm relative to the top rim. You need to make sure that the arm provides a tight fit and that it is secured at a 90 degrees angle on your toilet. If done correctly, the adjustment arm will fit right in, and you won’t have to worry about measurement problems. If you’re confused about the instructions mentioned in the manual regarding the adjustment arm, try to call someone from Illumibowl customer support.
- Suction Cups Not Working
While this brand boasts its high-quality suction cups that will keep the lights in the perfect spot, you will occasionally come across complaints about these suction cups not sticking properly. This only happens when you’ve purchased a faulty unit, and you need to contact your dealer immediately to get a replacement. There is no point in making use of a device that won’t stick properly, and you should just demand a replacement from the dealer.
- Delivery Issues
Lastly, many customers have been dissatisfied with the deliveries of their Illumibowl lights, and there is a good chance that the light you receive will be in rough condition. While this issue is not specifically with the device, it will still cause a lot of hassle as you’ll have to get the light replaced. So, make sure that you inform the dealer as soon as you get your hands on a light that is in rough shape.
Overall, these were some of the common Illumibowl light problems that customers have complained about over the years. Almost all of these problems are easy to fix, and you can just cycle power through the unit to get ahead of programming issues.