One of the essentials that you will need during the summer is a smart thermostat. This smart device can help make all of the difference for you in the house by adjusting the temperature according to what you want.
With that said, it can be pretty annoying to have your thermostat start acting up. Regarding this, we have had complaints from users who have mentioned how their Braeburn thermostat is not cooling. So, if you wish to learn how you can fix this, keep on reading below!
Fixing Braeburn Thermostat Not Cooling:
- Resetting the Thermostat
When you are attempting to troubleshoot your thermostat, then the first thing that you can do is to try and reset your thermostat. For this purpose, you will have to press the reset button. You may have to hold down the reset button for a couple of seconds. Also, try using a small device like a paper clip to reach the reset button.
Once the thermostat resets, you will notice the system reboots after which most of your stored preferences may have been wiped. However, this should be able to clear out most of the bugs that you might be facing with the thermostat.
- Checking the AC Filters
Another thing that you will need to check is the AC filters. There’s a good chance that there could be something wrong with your filters due to which you are now facing issues with the AC. In such cases, it is strongly advised that you start by checking whether there is too much debris accumulated inside the filters.
At the same time, we also recommend that you check for any possible leaks. If you do notice damage to the filters, you will have to get them replaced.
- Checking Power Source
You will also have to check if your thermostat is getting the required power it needs for operation. Most of the time, we have noticed how the thermostat is simply out of batteries due to which it stops working like it’s supposed to.
In either case, we strongly advise that you start with replacing the batteries. Do make sure that you get the right pair of non-rechargeable alkaline batteries. If you are having a hard time finding compatible batteries, you can refer to the user manual guide of your thermostat to learn more about them.
- Power Cycle
You can also try making your thermostat go through a simple power cycle. To do this, you will simply have to unplug the thermostat from any power source and keep it turned off for 30-60 seconds.
After the time passes, you can try reconnecting the thermostat to power and turn it back on. A complete power cycle should help the thermostat retain most of its functions.
- Contacting Support
If you have noticed none of the above-mentioned solutions work for you, then you can try contacting the support team for additional help on the matter. Let them know about the issue that you are facing. Similarly, the team should have a much better idea about why you are facing the issue in the first place.
They should be able to suggest further solutions giving you a higher chance of getting the issue fixed.
- Faulty Device
In case you were still unable to get rid of the problem, then you might be dealing with some sort of hardware fault. The only thing at this point would be to get a full replacement unit. However, doing so should cost you a few bucks which is why we recommend you do it as a last resort.
The Bottom Line:
Is your Braeburn thermostat not cooling? Typically, this happens whenever there is an issue with the power source of the thermostat. Although this can also be the result of your AC filters acting up, or because of a bug in the system. Whatever the case might be, following the solutions that have been listed above should help you get the whole error resolved.